Quelltext der Seite PFSense Konsolen Netzwerkeinstellungen

=Die Idee=
*Grundsetup der Netzwerkschnittstellen
*Auswahl WAN, LAN und OPT (später DMZ)
*Default Gateway
*DHCP Grundkonfiguration
*PFSense danach über das Lan Interface per Web administrierbar

=Erstes Setup=
*Should VLANs be set up now [y|n]?n 
*Enter the WAN interface name or 'a' for auto-detection 
 (vtnet0 vtnet1 vtnet2 or a): vtnet0
*Enter the LAN interface name or 'a' for auto-detection 
 NOTE: this enables full Firewalling/NAT mode.
 (vtnet1 vtnet2 a or nothing if finished): vtnet1
*Enter the Optional 1 interface name or 'a' for auto-detection
 (vtnet2 a or nothing if finished): vtnet2

 WAN  -> vtnet0
 LAN  -> vtnet1
 OPT1 -> vtnet2

*Do you want to proceed [y|n]? y
=Grundeinstellung=
<pre>
KVM Guest - Netgate Device ID: 2151ca91e52d2dc565fc

*** Welcome to pfSense 2.5.2-RELEASE (amd64) on pfSense ***

 WAN (wan)       -> vtnet0     -> v4/DHCP4: 194.59.156.217
 LAN (lan)       -> vtnet1     -> v4: 192.168.1.1/24
 OPT1 (opt1)     -> vtnet2     -> 

 0) Logout (SSH only)                  9) pfTop
 1) Assign Interfaces                 10) Filter Logs
 2) Set interface(s) IP address       11) Restart webConfigurator
 3) Reset webConfigurator password    12) PHP shell + pfSense tools
 4) Reset to factory defaults         13) Update from console
 5) Reboot system                     14) Enable Secure Shell (sshd)
 6) Halt system                       15) Restore recent configuration
 7) Ping host                         16) Restart PHP-FPM
 8) Shell
</pre>
*Enter an option:2
*[[PFSense 2) Set interface(s) IP address| 2) Set interface(s) IP address]]

;Entsprechned für die anderen Netze

=Resultat=
<pre>
KVM Guest - Netgate Device ID: 2151ca91e52d2dc565fc

*** Welcome to pfSense 2.5.2-RELEASE (amd64) on pfSense ***

 WAN (wan)       -> vtnet0     -> v4: 194.59.156.201/27
 LAN (lan)       -> vtnet1     -> v4: 192.168.151.1/24
 OPT1 (opt1)     -> vtnet2     -> v4: 192.168.101.1/24

 0) Logout (SSH only)                  9) pfTop
 1) Assign Interfaces                 10) Filter Logs
 2) Set interface(s) IP address       11) Restart webConfigurator
 3) Reset webConfigurator password    12) PHP shell + pfSense tools
 4) Reset to factory defaults         13) Update from console
 5) Reboot system                     14) Enable Secure Shell (sshd)
 6) Halt system                       15) Restore recent configuration
 7) Ping host                         16) Restart PHP-FPM
 8) Shell

Enter an option: 
</pre>