Thomas: /* autologin */

2015-12-04T19:59:47Z

autologin

Thomas am 4. Dezember 2015 um 19:59 Uhr

2015-12-04T19:59:31Z

Thomas: Die Seite wurde neu angelegt: „=virsh= *virt-install --name abba --ram 1024 --force --disk pool=default,size=10240,format=qcow2 --network bridge=dmz-telekom,mac=52:54:00:00:00:11 --grap…“

2015-12-04T19:37:52Z

Die Seite wurde neu angelegt: „=virsh= *virt-install --name abba --ram 1024 --force --disk pool=default,size=10240,format=qcow2 --network bridge=dmz-telekom,mac=52:54:00:00:00:11 --grap…“

Neue Seite

=virsh=
*virt-install --name abba --ram 1024 --force --disk pool=default,size=10240,format=qcow2 --network bridge=dmz-telekom,mac=52:54:00:00:00:11 --graphics vnc --pxe
=autologin=
*cat /etc/init/tty1.conf
<pre>
start on stopped rc RUNLEVEL=[2345] and (
not-container or
container CONTAINER=lxc or
container CONTAINER=lxc-libvirt)

stop on runlevel [!2345]

respawn
#exec /sbin/getty -8 38400 tty1
exec /bin/login -f root tty1 </dev/tty1 >/dev/tty1 2>&1
<pre>

← Nächstältere Version		Version vom 4. Dezember 2015, 19:59 Uhr
Zeile 15:		Zeile 15:
	exec /bin/login -f root tty1 </dev/tty1 >/dev/tty1 2>&1		exec /bin/login -f root tty1 </dev/tty1 >/dev/tty1 2>&1
	<pre>		<pre>
		+
		+	*cat /usr/local/sbin/mkmachine
		+	<pre>
		+	#!/bin/bash
		+	source /usr/local/lib/mksystem.lib
		+	SYSTEM=$1
		+	HN=$2
		+	IP=$3
		+	test -z "$SYSTEM" && SYSTEM="ubuntu"
		+	test -z "$HN" && HN="rumburak"
		+	test -z "$IP" && IP="192.168.252.69"
		+	NM="255.255.255.0"
		+	GW="192.168.252.1"
		+	DN="192.168.252.20"
		+	SE="taribo.lan xinux.org"
		+	PA="iptraf"
		+	US="stunk"
		+	PW="oimel"
		+	GR="sudo"
		+	RD="/mnt/new"
		+	CR="chroot $RD"
		+
		+
		+
		+
		+	part_format
		+
		+	echo $SYSTEM
		+	case $SYSTEM in
		+
		+	ubuntu)
		+	echo ubuntu
		+	SY="ubuntu-14.04-v5.tgz"
		+	UR="http://waka.xinux.org/images/$SY"
		+	mount_build
		+	ubuntu_netmodify
		+	ubuntu_modify
		+	;;
		+	centos)
		+	SY="centos-7-v2.tgz"
		+	UR="http://waka.xinux.org/images/$SY"
		+	mount_build
		+	centos_netmodify
		+	centos_modify
		+	;;
		+	arch)
		+	SY="archlinux-bootstrap-2015.10.01-x86_64.tar.gz"
		+	UR="http://waka.xinux.org/images/$SY"
		+	mount_build
		+	#centos_netmodify
		+	#centos_modify
		+	;;
		+	esac
		+
		+	#unmount
		+	</pre>
		+
		+
		+	cat /usr/local/lib/mksystem.lib
		+	<pre>
		+	#!/bin/bash
		+
		+	function part_format() {
		+	echo "mklabel"
		+	parted -s /dev/vda mklabel msdos
		+	echo "mkpart swap"
		+	parted -s /dev/vda mkpart primary linux-swap 1 2000
		+	echo "mkpart /"
		+	parted -s /dev/vda mkpart primary ext2 2000 100%
		+	echo "mkswap"
		+	mkswap /dev/vda1 > /dev/null 2>&1
		+	echo "mkfs.ext4"
		+	mkfs.ext4 /dev/vda2 > /dev/null 2>&1
		+	test -d $RD \|\| mkdir $RD
		+	}
		+
		+	function mount_build() {
		+	echo "mount new filesystem"
		+	mount /dev/vda2 $RD
		+	echo "unpackings system - wait"
		+	wget -q -O - $UR \| tar -C $RD -xzf -
		+	echo "mount /dev /proc /sys"
		+	mount -o bind /dev $RD/dev
		+	mount -o bind /sys $RD/sys
		+	mount -o bind /proc $RD/proc
		+	}
		+
		+
		+	function unmount() {
		+	umount $RD/proc
		+	umount $RD/sys
		+	umount $RD/dev
		+	umount $RD
		+	}
		+
		+
		+	function ubuntu_netmodify() {
		+	echo $HN > $RD/etc/hostname
		+
		+	if test -z "IP"
		+	then
		+	cat<<HERE > "$RD/etc/network/interfaces"
		+	auto lo
		+	iface lo inet loopback
		+
		+	auto eth0
		+	iface eth0 inet dhcp
		+	HERE
		+	else
		+
		+	cat<<HERE > "$RD/etc/network/interfaces"
		+	auto lo
		+	iface lo inet loopback
		+
		+	auto eth0
		+	iface eth0 inet static
		+	address $IP
		+	netmask $NM
		+	gateway $GW
		+	dns-nameservers $DN
		+	dns-search $SE
		+	HERE
		+	fi
		+	}
		+
		+	function centos_netmodify() {
		+	echo $HN > $RD/etc/hostname
		+	if test -z "IP"
		+	then
		+	:
		+	else
		+	cat<<HERE > "$RD/etc/sysconfig/network-scripts/ifcfg-eth0"
		+	TYPE="Ethernet"
		+	BOOTPROTO="none"
		+	DEFROUTE="yes"
		+	IPV4_FAILURE_FATAL="no"
		+	IPV6INIT="yes"
		+	IPV6_AUTOCONF="yes"
		+	IPV6_DEFROUTE="yes"
		+	IPV6_FAILURE_FATAL="no"
		+	NAME="eth0"
		+	UUID="56aa41e7-7911-49a4-aa24-98375f52522e"
		+	DEVICE="eth0"
		+	ONBOOT="yes"
		+	DNS1=$DN
		+	DOMAIN=$SE
		+	IPADDR=$IP
		+	PREFIX="24"
		+	GATEWAY=$GW
		+	IPV6_PEERDNS="yes"
		+	IPV6_PEERROUTES="yes"
		+	IPV6_PRIVACY="no"
		+	HERE
		+	echo "nameserver $DN" > $RD/etc/resolv.conf
		+	echo "search $SE" >> $RD/etc/resolv.conf
		+	fi
		+	}
		+
		+	function ubuntu_modify() {
		+	mv $RD/etc/resolv.conf $RD/etc/resolv.conf.org
		+	echo "nameserver 8.8.8.8" > $RD/etc/resolv.conf
		+	$CR apt-get update
		+	$CR apt-get -y install $PA
		+	$CR useradd -m -s /bin/bash -G $GR $US
		+	echo "$US:$PW" \| $CR chpasswd
		+	echo "grub-install"
		+	grub-install --root-directory=$RD --boot-directory=$RD/boot /dev/vda
		+	echo "update-grub"
		+	$CR update-grub
		+	rm $RD/etc/resolv.conf
		+	mv $RD/etc/resolv.conf.org $RD/etc/resolv.conf
		+	}
		+
		+	function centos_modify() {
		+	mv $RD/etc/resolv.conf $RD/etc/resolv.conf.org
		+	echo "nameserver 8.8.8.8" > $RD/etc/resolv.conf
		+	$CR yum -y update
		+	$CR yum -y install $PA
		+	echo "GRUB_DISABLE_LINUX_UUID=true" >> $RD/etc/default/grub
		+	echo "GRUB_ENABLE_LINUX_LABEL=true" >> $RD/etc/default/grub
		+	echo "SELINUX=disabled" > $RD/etc/sysconfig/selinux
		+	echo "SELINUXTYPE=targeted" >> $RD/etc/sysconfig/selinux
		+	sed -i.org -e '/GRUB_CMDLINE_LINUX/s/.$/ net.ifnames=0 biosdevname=0"/' $RD/etc/default/grub
		+	echo "grub-install"
		+	$CR grub2-install /dev/vda
		+	echo "update-grub"
		+	$CR grub2-mkconfig -o /boot/grub2/grub.cfg
		+	$CR useradd -m -s /bin/bash $US
		+	echo "$US:$PW" \| $CR chpasswd
		+	rm $RD/etc/resolv.conf
		+	mv $RD/etc/resolv.conf.org $RD/etc/resolv.conf
		+	}
		+	</pre>

@@ Zeile 14: / Zeile 14: @@
 #exec /sbin/getty -8 38400 tty1
 exec /bin/login -f root tty1 </dev/tty1 >/dev/tty1 2>&1
-<pre>
+</pre>
 *cat /usr/local/sbin/mkmachine

Autoinstall - Versionsgeschichte

Thomas: /* autologin */

Thomas am 4. Dezember 2015 um 19:59 Uhr

Thomas: Die Seite wurde neu angelegt: „=virsh= *virt-install --name abba --ram 1024 --force --disk pool=default,size=10240,format=qcow2 --network bridge=dmz-telekom,mac=52:54:00:00:00:11 --grap…“