Openswan-bintec-psk: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
Thomas (Diskussion | Beiträge) |
Thomas (Diskussion | Beiträge) |
||
| (Eine dazwischenliegende Version desselben Benutzers wird nicht angezeigt) | |||
| Zeile 2: | Zeile 2: | ||
*/etc/ipsec.conf | */etc/ipsec.conf | ||
<pre> | <pre> | ||
| + | version 2.0 | ||
| + | config setup | ||
| + | dumpdir=/var/run/pluto/ | ||
| + | nat_traversal=no | ||
| + | oe=off | ||
| + | protostack=netkey | ||
| + | |||
| + | conn b2o | ||
| + | authby=secret | ||
| + | left=192.168.252.200 | ||
| + | leftid=@rome | ||
| + | leftsubnet=10.254.31.0/24 | ||
| + | right=192.168.252.122 | ||
| + | rightid=@bintec | ||
| + | rightsubnet=10.254.34.0/24 | ||
| + | ike=aes256-md5-modp1536 | ||
| + | phase2alg=aes256-md5-1536 | ||
| + | pfs=yes | ||
| + | auto=start | ||
</pre> | </pre> | ||
*/etc/ipsec.secret | */etc/ipsec.secret | ||
| + | @bintec @rome : PSK "suxer" | ||
| + | |||
=Bintec= | =Bintec= | ||
==IKE and IPSEC Config== | ==IKE and IPSEC Config== | ||
Aktuelle Version vom 30. März 2017, 14:17 Uhr
Openswan
- /etc/ipsec.conf
version 2.0
config setup
dumpdir=/var/run/pluto/
nat_traversal=no
oe=off
protostack=netkey
conn b2o
authby=secret
left=192.168.252.200
leftid=@rome
leftsubnet=10.254.31.0/24
right=192.168.252.122
rightid=@bintec
rightsubnet=10.254.34.0/24
ike=aes256-md5-modp1536
phase2alg=aes256-md5-1536
pfs=yes
auto=start
- /etc/ipsec.secret
@bintec @rome : PSK "suxer"
Bintec
IKE and IPSEC Config
Peer
- VPN
- IPSec
- IPSec Peers
- New
- IPSec Peers
- IPSec
