L2TP: Unterschied zwischen den Versionen

@@ Zeile 1: / Zeile 1: @@
-=Installation=
- apt-get install  xl2tpd ppp openswan
-=Openswan=
- cat /etc/ipsec.conf
- version 2.0
- config setup
-     nat_traversal=yes
-     virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12
-     oe=off
-     protostack=netkey
- conn l2tp
-    authby=secret
-    pfs=no
-    auto=add
-    type=transport
-    left=XXX.XXX.XXX.XXX
-    leftprotoport=17/1701
-    right=%any
-    rightprotoport=17/%any
- cat /etc/ipsec.secrets
- XXX.XXX.XXX.XXX  %any : PSK "1234"
-=XL2TP=
- cat xl2tpd.conf
- [global]
- ipsec saref = yes
- [lns default]
- ip range = 10.1.2.2-10.1.2.255
- local ip = 10.1.2.1
- refuse chap = yes
- refuse pap = yes
- require authentication = yes
- ppp debug = yes
- pppoptfile = /etc/ppp/options.xl2tpd
- length bit = yes
-~
-~
-~
-Quellen:
-*http://blog.riobard.com/2010/04/30/l2tp-over-ipsec-ubuntu
-*http://pleasefeedthegeek.wordpress.com/2012/04/21/l2tp-ubuntu-server-setup-for-ios-clients/

Aktuelle Version vom 7. September 2017, 09:22 Uhr