L2TP: Unterschied zwischen den Versionen

@@ Zeile 1: / Zeile 1: @@
-=Server=
-==Installation==
- apt-get install  xl2tpd ppp openswan
-==Openswan==
- cat /etc/ipsec.conf
- version 2.0
- config setup
-     nat_traversal=yes
-     virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12
-     oe=off
-     protostack=netkey
- conn l2tp
-    authby=secret
-    pfs=no
-    auto=add
-    type=transport
-    left=XXX.XXX.XXX.XXX
-    leftprotoport=17/1701
-    right=%any
-    rightprotoport=17/%any
- cat /etc/ipsec.secrets
- XXX.XXX.XXX.XXX  %any : PSK "1234"
-==XL2TP==
- cat /etc/xl2tpd/xl2tpd.conf
- [global]
- ipsec saref = yes
- [lns default]
- ip range = 10.1.2.2-10.1.2.255
- local ip = 10.1.2.1
- refuse chap = yes
- refuse pap = yes
- require authentication = yes
- ppp debug = yes
- pppoptfile = /etc/ppp/options.xl2tpd
- length bit = yes
-==PPP==
- cat /etc/ppp/options.xl2tpd
- require-mschap-v2
- ms-dns 192.168.240.21
- ms-dns 192.168.240.22
- asyncmap 0
- auth
- crtscts
- lock
- hide-password
- modem
- debug
- name l2tpd
- proxyarp
- lcp-echo-interval 30
- lcp-echo-failure 4
- cat /etc/ppp/chap-secrets
- xinux        l2tpd       "geheimes-passwort"	       *
- l2tpd        xinux	  "geheimes-passwort"	       *
-=Client=
-==Installation==
- apt-get install  xl2tpd ppp openswan
-==ipsec==
- cat /etc/ipsec.conf
- version	2.0	# conforms to second version of ipsec.conf specification
- config setup
- 	dumpdir=/var/run/pluto/
- 	protostack=netkey
- 	nat_traversal=yes
- 	virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12,%v4:25.0.0.0/8,%v6:fd00::/8,%v6:fe80::/10
- 	oe=off
- conn  yourconn
- 	authby=secret
-       pfs=no
-       auto=add
-       keyingtries=3
-       dpddelay=30
-       dpdtimeout=120
-       dpdaction=clear
-       rekey=yes
-       ikelifetime=8h
-       keylife=1h
-       type=transport
-       left=%defaultroute
-       leftprotoport=17/1701
-       right=yourvpnserver.com
-       rightprotoport=17/1701
- cat /etc/ipsec.secrets
- %any yourvpnserver.com : PSK "pissespisse"
-==xl2tp==
- cat /etc/xl2tpd/xl2tpd.conf
- [lac vpn-connection]
- lns = yourvpnserver.com
- ppp debug = yes
- pppoptfile = /etc/ppp/options.l2tpd.client
- length bit = yes
-==ppp==
- cat /etc/ppp/options.l2tpd.client
- ipcp-accept-local
- ipcp-accept-remote
- refuse-eap
- require-mschap-v2
- noccp
- noauth
- idle 1800
- mtu 1410
- mru 1410
- defaultroute
- usepeerdns
- debug
- lock
- connect-delay 5000
- name xinux
- password suxer
-==Start Script==
- #!/bin/bash
-  case $1 in
- start)
-  /etc/init.d/ipsec restart
-  sleep 1
-  ipsec auto --up yourconn
-  sleep 1
-  /etc/init.d/xl2tpd start
-  sleep 1
-  echo "c vpn-connection" > /var/run/xl2tpd/l2tp-control
-  sleep 5
-  ip route add 192.168.240.0/21 via 172.28.6.1
- ;;
- stop)
-  ip route del 192.168.240.0/21
-  echo "d vpn-connection" > /var/run/xl2tpd/l2tp-control
-  /etc/init.d/xl2tpd stop
-  ipsec auto --down yourconn
-  /etc/init.d/ipsec stop
- ;;
- esac
-==Client grafisch==
- sudo apt-add-repository ppa:werner-jaeger/ppa-werner-vpn
- sudo apt-get update
- sudo apt-get install l2tp-ipsec-vpn
-*http://wiki.l2tpipsecvpn.tuxfamily.org/wiki/index.php?title=Main_Page
-Quellen:
-*http://blog.riobard.com/2010/04/30/l2tp-over-ipsec-ubuntu
-*http://pleasefeedthegeek.wordpress.com/2012/04/21/l2tp-ubuntu-server-setup-for-ios-clients/
-*http://www.jacco2.dds.nl/networking/linux-l2tp.html
-*https://wiki.archlinux.org/index.php/L2TP/IPsec_VPN_client_setup
-*http://bailey.st/blog/2011/07/14/connecting-to-a-l2tpipsec-vpn-from-ubuntu-desktop/

L2TP: Unterschied zwischen den Versionen

Aktuelle Version vom 7. September 2017, 09:22 Uhr

Navigationsmenü

Suche