WLAN AccessPoint: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
Pascal (Diskussion | Beiträge) |
Pascal (Diskussion | Beiträge) |
||
| Zeile 41: | Zeile 41: | ||
DAEMON_CONF="/etc/hostapd/hostapd.conf" | DAEMON_CONF="/etc/hostapd/hostapd.conf" | ||
/etc/hostapd/hostapd.conf | /etc/hostapd/hostapd.conf | ||
| − | interface=wlan0 | + | interface=wlan0 # WLAN Device |
| − | bridge=br0 | + | bridge=br0 # Bridge Device, falls WLAN via Bridge genutzt wird |
driver=nl80211 | driver=nl80211 | ||
hw_mode=g # Aktivierung von 802.11g | hw_mode=g # Aktivierung von 802.11g | ||
| − | ssid=<SSID-NAME> | + | ssid=<SSID-NAME> # Netwerk Name |
| − | channel=2 | + | channel=2 # Kanal |
| − | wpa=2 | + | wpa=2 # WPA Version |
| − | wpa_passphrase=<SECURE PASSWORD> | + | wpa_passphrase=<SECURE PASSWORD> # Passwort |
wpa_key_mgmt=WPA-PSK | wpa_key_mgmt=WPA-PSK | ||
wpa_pairwise=CCMP | wpa_pairwise=CCMP | ||
Version vom 9. Juni 2011, 12:28 Uhr
Vorbereitungen
USB Passtrough auf VMWare ESXi
- Eigenschaften -> Hardware
- Hinzufügen
- "USB-Controller"
- OK
- Hinzufügen
- "USB-Gerät"
- "USB-Hostgerät" auswählen
- OK
WLAN Treiber
rt73usb Firmware compilieren
cd /usr/src/ wget http://www.ralinktech.com.tw/download.php?t=U0wyRnpjMlYwY3k4eU1ERXhMekF5THpJMEwyUnZkMjVzYjJGa01qa3dORGsyTnpZMU9TNWllakk5UFQweU1ERXhYekF5TVRCZlVsUTNNMTlNYVc1MWVGOVRWRUZmUkhKMk1TNHhMakF1TlE9PUM= -O 2011_0210_RT73_Linux_STA_Drv1.1.0.5.bz2 tar -xvjf 2011_0210_RT73_Linux_STA_Drv1.1.0.5.bz2 cd 2011_0210_RT73_Linux_STA_Drv1.1.0.5/Module make cp -v rt73.bin /lib/firmware/
Bridge
aptitude install bridge-utils
/etc/network/interfaces
auto br0
iface br0 inet static
# pre-up brctl addbr br0
pre-up /etc/init.d/hostapd stop
address 172.28.6.2
netmask 255.255.255.0
gateway 172.28.6.1
bridge_ports eth1 wlan0
bridge_stp off
bridge_fd 0
bridge_maxwait 0
up /etc/init.d/hostapd start
AccessPoint Konfigurieren
hostapd
aptitude install hostapd
/etc/default/hostapd
DAEMON_CONF="/etc/hostapd/hostapd.conf"
/etc/hostapd/hostapd.conf
interface=wlan0 # WLAN Device bridge=br0 # Bridge Device, falls WLAN via Bridge genutzt wird driver=nl80211 hw_mode=g # Aktivierung von 802.11g ssid=<SSID-NAME> # Netwerk Name channel=2 # Kanal wpa=2 # WPA Version wpa_passphrase=<SECURE PASSWORD> # Passwort wpa_key_mgmt=WPA-PSK wpa_pairwise=CCMP wpa_group_rekey=600 wpa_gmk_rekey=86400
DHCP
wpa_supplicant
Links
- http://ubuntuforums.org/showthread.php?t=400236&page=118
- http://www.linux.com/learn/tutorials/442417-create-a-secure-linux-based-wireless-access-point
- http://mcbridematt.dhs.org/blog/tag/wireless
- http://rt2x00.serialmonkey.com/phpBB/viewtopic.php?f=5&t=5203
- http://rt2x00.serialmonkey.com/wiki/index.php/AP-mode_Howto
- http://git.kernel.org/?p=linux/kernel/git/dwmw2/linux-firmware.git;a=tree
- https://help.ubuntu.com/community/NetworkConnectionBridge