OPENVPN SITE TO SITE CERT: Unterschied zwischen den Versionen

Aus Xinux Wiki
Zur Navigation springen Zur Suche springen
Zeile 57: Zeile 57:
 
key /etc/openvpn/ssl/garlic.xinux.org.key
 
key /etc/openvpn/ssl/garlic.xinux.org.key
 
</pre>
 
</pre>
−
 
+
==Place cert-stuff on hubsi==
−
==Copy to hubsi==
+
*cd /etc/openvpn/
−
*scp static.key hubsi:$PWD
+
*mkdir ssl
−
=Openvpn config on garlic=
+
Place also hubsi.xinux.org.crt  hubsi.xinux.org.key xin-ca.crt in this directory
 +
==Openvpn Config on garlic==
 
*vi /etc/openvpn/server.conf
 
*vi /etc/openvpn/server.conf
−
<pre>
 
−
remote 10.82.1.195
 
−
dev tun
 
−
ifconfig 172.30.30.1 172.30.30.2
 
−
secret static.key
 
−
route 192.168.55.0 255.255.255.0
 
−
keepalive 10 120
 
−
</pre>
 
−
 
−
=Openvpn config on hubsi=
 
−
*vi /etc/openvpn/client.conf
 
 
<pre>
 
<pre>
 
remote 10.82.1.211
 
remote 10.82.1.211
 
dev tun
 
dev tun
 +
tls-client
 
ifconfig 172.30.30.2 172.30.30.1
 
ifconfig 172.30.30.2 172.30.30.1
−
secret static.key
 
 
route 192.168.33.0 255.255.255.0
 
route 192.168.33.0 255.255.255.0
 
keepalive 10 120
 
keepalive 10 120
 +
ca /etc/openvpn/ssl/xin-ca.crt
 +
cert /etc/openvpn/ssl/hubsi.xinux.org.crt
 +
key /etc/openvpn/ssl/hubsi.xinux.org.key
 
</pre>
 
</pre>

Version vom 24. Oktober 2019, 11:31 Uhr

Layout

-192.168.33.1/24 -|garlic|-10.82.1.211---------------------10.82.1.195-|hubsi|-192.168.55.1/24

Interfaces

garlic

auto ens18
iface ens18 inet static
 address 10.82.1.211
 netmask 255.255.0.0
 gateway 10.82.0.1

auto dummy0
iface dummy0 inet static
 address 192.168.33.1
 netmask 255.255.255.0
 pre-up ip link add dummy0 type dummy

hubsi

auto ens18
iface ens18 inet static
 address 10.82.1.195
 netmask 255.255.0.0
 gateway 10.82.0.1

auto dummy0
iface dummy0 inet static
 address 192.168.55.1
 netmask 255.255.255.0
 pre-up ip link add dummy0 type dummy

Ipfordward on

  • cat /etc/sysctl.conf
net.ipv4.ip_forward=1
  • sysctl -p

Openvpn

Install

  • sudo apt-get install openvpn

Generate Diffie-Hellman and place cert-stuff on garlic

  • cd /etc/openvpn/
  • mkdir ssl
  • cd ssl
  • openssl dhparam -out dh2048.pem 2048

Place also garlic.xinux.org.crt garlic.xinux.org.key xin-ca.crt in this directory

Openvpn Config on garlic

  • vi /etc/openvpn/server.conf
remote 10.82.1.195
dev tun
tls-server
ifconfig 172.30.30.1 172.30.30.2
route 192.168.55.0 255.255.255.0
keepalive 10 120
dh /etc/openvpn/ssl/dh2048.pem
ca /etc/openvpn/ssl/xin-ca.crt
cert /etc/openvpn/ssl/garlic.xinux.org.crt
key /etc/openvpn/ssl/garlic.xinux.org.key

Place cert-stuff on hubsi

  • cd /etc/openvpn/
  • mkdir ssl

Place also hubsi.xinux.org.crt hubsi.xinux.org.key xin-ca.crt in this directory

Openvpn Config on garlic

  • vi /etc/openvpn/server.conf
remote 10.82.1.211
dev tun
tls-client
ifconfig 172.30.30.2 172.30.30.1
route 192.168.33.0 255.255.255.0
keepalive 10 120
ca /etc/openvpn/ssl/xin-ca.crt
cert /etc/openvpn/ssl/hubsi.xinux.org.crt
key /etc/openvpn/ssl/hubsi.xinux.org.key
Abgerufen von „http://wiki.ixheim.de/index.php?title=OPENVPN_SITE_TO_SITE_CERT&oldid=18787“