Aktuelle Version vom 19. August 2021, 18:41 Uhr

Installation

apt install bridge-utils hostapd

Forward

/etc/sysctl.conf

net.ipv4.ip_forward = 1

sysctl -p

Interfaces

/etc/network/interfaces

auto vmbr0
iface vmbr0 inet static
 address 10.10.10.1
 netmask 255.255.255.0
 dns-nameservers 10.80.100.103
 dns-search hack.lab
 bridge_ports none
 bridge_stp off
 bridge_fd 0
 bridge_maxwait 0

ifup -v vmbr0

hostapd

/etc/hostapd

interface=wlan0
bridge=vmbr0
driver=nl80211
ssid=CHEWINGGUM
hw_mode=g
channel=6
macaddr_acl=0
auth_algs=1
ignore_broadcast_ssid=0
wpa=2
wpa_passphrase=9twin-towers11
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP

systemctl unmask hostapd
systemctl enable hostapd --now

@@ Zeile 1: / Zeile 1: @@
-= Vorbereitungen =
-== USB Passtrough VMWare ESXi ==
-;Eigenschaften -> Hardware:
-:Hinzufügen
-::"USB-Controller"
-::OK
-:Hinzufügen
-::"USB-Gerät"
-::"USB-Hostgerät" auswählen
-::OK
-== WLAN Treiber ==
-=== rt73usb Firmware compilieren ===
- cd /usr/src/
- <nowiki>wget http://www.ralinktech.com.tw/download.php?t=U0wyRnpjMlYwY3k4eU1ERXhMekF5THpJMEwyUnZkMjVzYjJGa01qa3dORGsyTnpZMU9TNWllakk5UFQweU1ERXhYekF5TVRCZlVsUTNNMTlNYVc1MWVGOVRWRUZmUkhKMk1TNHhMakF1TlE9PUM= -O 2011_0210_RT73_Linux_STA_Drv1.1.0.5.bz2</nowiki>
- tar -xvjf 2011_0210_RT73_Linux_STA_Drv1.1.0.5.bz2
- cd 2011_0210_RT73_Linux_STA_Drv1.1.0.5/Module
- make
- cp -v rt73.bin /lib/firmware/
-== Bridge ==
+=Installation=
- aptitude install bridge-utils
+*apt install bridge-utils hostapd
-/etc/network/interfaces
+=Forward=
- auto br0
+;/etc/sysctl.conf:
-  iface br0 inet static
+  net.ipv4.ip_forward = 1
- 	pre-up brctl addbr br0
+*sysctl -p
- 	address 172.28.6.2
- 	netmask 255.255.255.0
- 	gateway 172.28.6.1
- 	bridge_ports eth1 wlan0
- 	bridge_stp off
- 	bridge_fd 0
- 	bridge_maxwait 0
-= AccessPoint Konfigurieren =
+=Interfaces=
-== hostapd ==
+;/etc/network/interfaces
- aptitude install hostapd
+<pre>
-/etc/default/hostapd
+auto vmbr0
-  DAEMON_CONF="/etc/hostapd/hostapd.conf"
+iface vmbr0 inet static
-/etc/hostapd/hostapd.conf
+  address 10.10.10.1
-  interface=wlan0
+ netmask 255.255.255.0
-  driver=nl80211
+  dns-nameservers 10.80.100.103
-  ssid=<SSID-NAME>
+  dns-search hack.lab
-  channel=2
+  bridge_ports none
-  wpa=2
+  bridge_stp off
-  wpa_passphrase=<SECURE PASSWORD>
+  bridge_fd 0
- wpa_key_mgmt=WPA-PSK
+  bridge_maxwait 0
- wpa_pairwise=CCMP
+</pre>
- wpa_group_rekey=600
+*ifup -v vmbr0
- wpa_gmk_rekey=86400
-== DHCP ==
+=hostapd=
+*/etc/hostapd
-== wpa_supplicant ==
+<pre>
+interface=wlan0
+bridge=vmbr0
+driver=nl80211
+ssid=CHEWINGGUM
+hw_mode=g
+channel=6
+macaddr_acl=0
+auth_algs=1
+ignore_broadcast_ssid=0
+wpa=2
+wpa_passphrase=9twin-towers11
+wpa_key_mgmt=WPA-PSK
+wpa_pairwise=TKIP
+rsn_pairwise=CCMP
+</pre>
+*systemctl unmask  hostapd
+*systemctl enable  hostapd --now
 = Links =
+* https://wiki.ubuntuusers.de/Netzwerkbr%C3%BCcke/#Bruecken-in-drahtlose-Netze
 * http://ubuntuforums.org/showthread.php?t=400236&page=118
 * http://www.linux.com/learn/tutorials/442417-create-a-secure-linux-based-wireless-access-point

WLAN AccessPoint: Unterschied zwischen den Versionen

Aktuelle Version vom 19. August 2021, 18:41 Uhr

Inhaltsverzeichnis

Installation

Forward

Interfaces

hostapd

Links

Navigationsmenü