Opnsense/dnydns-fritzbox

Opnsense IPSec Konfiguration

Phase 1

Phase 2

Fritzbox Ipsec Konfiguration

vpncfg {

       connections {
               enabled = yes;
               conn_type = conntype_lan;
               name = "fritz-opnsense";
               always_renew = yes;
               reject_not_encrypted = no;
               dont_filter_netbios = yes;
               localip = 0.0.0.0;
               local_virtualip = 0.0.0.0;
               remoteip = 0.0.0.0;
               remote_virtualip = 0.0.0.0;
               remotehostname = "opnsense.lab.intra";
               localid {
                      fqdn = "r2ek5psxg3dezv4e.myfritz.net";
               }
               remoteid {
                      fqdn = "opnsense.lab.intra";
               }
               mode = phase1_mode_idp;    
               phase1ss = "alt/aes/sha";
               keytype = connkeytype_pre_shared;
               key = "eisvolk";
               cert_do_server_auth = no;
               use_nat_t = no;
               use_xauth = no;
               use_cfgmode = no;
               phase2localid {
                       ipnet {
                               ipaddr = 192.168.188.1;
                               mask = 255.255.255.0;
                       }
               }
               phase2remoteid {
                       ipnet {
                               ipaddr = 192.168.1.1;
                               mask = 255.255.255.0;
                       }
               }
               phase2ss = "esp-aes256-3des-sha/ah-no/comp-lzs-no/pfs";
               accesslist = "permit ip any 192.168.1.0 255.255.255.0";
       }  ike_forward_rules =  "udp 0.0.0.0:500 0.0.0.0:500",
       "udp 0.0.0.0:4500 0.0.0.0:4500";
       }