Dante Client: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
(Die Seite wurde neu angelegt: „=Install= *sudo apt install dante-client =Konfiguration= *cat /etc/dante.conf <pre> . route { from: 0.0.0.0/0 to: 0.0.0.0/0 via: 127…“) |
|||
| Zeile 5: | Zeile 5: | ||
<pre> . | <pre> . | ||
route { | route { | ||
| − | from: 0.0.0.0/0 to: 0.0.0.0/0 via: | + | from: 0.0.0.0/0 to: 0.0.0.0/0 via: 78.88.77.194 port = 1080 |
protocol: tcp udp | protocol: tcp udp | ||
proxyprotocol: socks_v4 socks_v5 | proxyprotocol: socks_v4 socks_v5 | ||
| Zeile 11: | Zeile 11: | ||
} | } | ||
</pre> | </pre> | ||
| + | |||
=Socksifizierung von ssh= | =Socksifizierung von ssh= | ||
*socksify ssh root@192.168.0.254 -p 8472 | *socksify ssh root@192.168.0.254 -p 8472 | ||
Version vom 30. August 2022, 10:50 Uhr
Install
- sudo apt install dante-client
Konfiguration
- cat /etc/dante.conf
.
route {
from: 0.0.0.0/0 to: 0.0.0.0/0 via: 78.88.77.194 port = 1080
protocol: tcp udp
proxyprotocol: socks_v4 socks_v5
method: none
}
Socksifizierung von ssh
- socksify ssh root@192.168.0.254 -p 8472