Strongswan workshop: Unterschied zwischen den Versionen

Aus Xinux Wiki
Zur Navigation springen Zur Suche springen
Zeile 15: Zeile 15:
  
 
  --- 10.82.244.1 ping statistics ---
 
  --- 10.82.244.1 ping statistics ---
 +
;root@fw2:~# tcpdump -ni eth0 esp
 +
tcpdump: verbose output suppressed, use -v[v]... for full protocol decode
 +
listening on eth0, link-type EN10MB (Ethernet), snapshot length 262144 bytes
 +
08:55:33.436945 IP 10.82.227.12 > 10.82.227.22: ESP(spi=0xc4de821a,seq=0x10), length 136
 +
08:55:33.437107 IP 10.82.227.22 > 10.82.227.12: ESP(spi=0xcef198fc,seq=0x10), length 136
 +
08:55:34.438319 IP 10.82.227.12 > 10.82.227.22: ESP(spi=0xc4de821a,seq=0x11), length 136
 +
08:55:34.438501 IP 10.82.227.22 > 10.82.227.12: ESP(spi=0xcef198fc,seq=0x11), length 136
 +
08:55:35.439782 IP 10.82.227.12 > 10.82.227.22: ESP(spi=0xc4de821a,seq=0x12), length 136
 +
08:55:35.439970 IP 10.82.227.22 > 10.82.227.12: ESP(spi=0xcef198fc,seq=0x12), length 136
  
 
=Beispiele=
 
=Beispiele=
 
*[[strongswan zu strongswan]]
 
*[[strongswan zu strongswan]]
 
*[[strongswan zu strongswan ikev2 site to site]]
 
*[[strongswan zu strongswan ikev2 site to site]]

Version vom 5. September 2022, 08:57 Uhr

Allgemein

Setup

Schaubild

Tests

root@fw1
~# ping -c 3 -I 10.82.243.1 10.82.244.1
PING 10.82.244.1 (10.82.244.1) from 10.82.243.1 : 56(84) bytes of data.
64 bytes from 10.82.244.1: icmp_seq=1 ttl=64 time=0.923 ms
64 bytes from 10.82.244.1: icmp_seq=2 ttl=64 time=0.978 ms
64 bytes from 10.82.244.1: icmp_seq=3 ttl=64 time=0.767 ms 
--- 10.82.244.1 ping statistics ---
root@fw2
~# tcpdump -ni eth0 esp
tcpdump: verbose output suppressed, use -v[v]... for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), snapshot length 262144 bytes
08:55:33.436945 IP 10.82.227.12 > 10.82.227.22: ESP(spi=0xc4de821a,seq=0x10), length 136
08:55:33.437107 IP 10.82.227.22 > 10.82.227.12: ESP(spi=0xcef198fc,seq=0x10), length 136
08:55:34.438319 IP 10.82.227.12 > 10.82.227.22: ESP(spi=0xc4de821a,seq=0x11), length 136
08:55:34.438501 IP 10.82.227.22 > 10.82.227.12: ESP(spi=0xcef198fc,seq=0x11), length 136
08:55:35.439782 IP 10.82.227.12 > 10.82.227.22: ESP(spi=0xc4de821a,seq=0x12), length 136
08:55:35.439970 IP 10.82.227.22 > 10.82.227.12: ESP(spi=0xcef198fc,seq=0x12), length 136

Beispiele