Strongswan workshop setup: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
(Die Seite wurde neu angelegt: „=Schaubild= {{#drawio:strongswan-workshop-1}} =Tests= ;root@fw1:~# ping -c 3 -I 10.82.243.1 10.82.244.1 PING 10.82.244.1 (10.82.244.1) from 10.82.243.1 : 56(8…“) |
|||
| Zeile 1: | Zeile 1: | ||
=Schaubild= | =Schaubild= | ||
{{#drawio:strongswan-workshop-1}} | {{#drawio:strongswan-workshop-1}} | ||
| + | {{#drawio:strongswan-workshop-2}} | ||
| + | |||
=Tests= | =Tests= | ||
;root@fw1:~# ping -c 3 -I 10.82.243.1 10.82.244.1 | ;root@fw1:~# ping -c 3 -I 10.82.243.1 10.82.244.1 | ||
Version vom 5. September 2022, 12:50 Uhr
Schaubild
Tests
- root@fw1
- ~# ping -c 3 -I 10.82.243.1 10.82.244.1
PING 10.82.244.1 (10.82.244.1) from 10.82.243.1 : 56(84) bytes of data. 64 bytes from 10.82.244.1: icmp_seq=1 ttl=64 time=0.923 ms 64 bytes from 10.82.244.1: icmp_seq=2 ttl=64 time=0.978 ms 64 bytes from 10.82.244.1: icmp_seq=3 ttl=64 time=0.767 ms
--- 10.82.244.1 ping statistics ---
- root@fw2
- ~# tcpdump -ni eth0 esp
tcpdump: verbose output suppressed, use -v[v]... for full protocol decode listening on eth0, link-type EN10MB (Ethernet), snapshot length 262144 bytes 08:55:33.436945 IP 10.82.227.12 > 10.82.227.22: ESP(spi=0xc4de821a,seq=0x10), length 136 08:55:33.437107 IP 10.82.227.22 > 10.82.227.12: ESP(spi=0xcef198fc,seq=0x10), length 136 08:55:34.438319 IP 10.82.227.12 > 10.82.227.22: ESP(spi=0xc4de821a,seq=0x11), length 136 08:55:34.438501 IP 10.82.227.22 > 10.82.227.12: ESP(spi=0xcef198fc,seq=0x11), length 136 08:55:35.439782 IP 10.82.227.12 > 10.82.227.22: ESP(spi=0xc4de821a,seq=0x12), length 136 08:55:35.439970 IP 10.82.227.22 > 10.82.227.12: ESP(spi=0xcef198fc,seq=0x12), length 136

