OVPN lan to lan Bridge Beispiel: Unterschied zwischen den Versionen

Aus Xinux Wiki
Zur Navigation springen Zur Suche springen
(Die Seite wurde neu angelegt: „=Netzwerkkonfiguration= ==Client== auto vmbr0 iface vmbr0 inet manual bridge-ports none bridge-stp off pre-up openvpn –mktun –dev tap1 post-up ip address a…“)
 
Zeile 1: Zeile 1:
−
=Netzwerkkonfiguration= ==Client== auto vmbr0 iface vmbr0 inet manual bridge-ports none bridge-stp off pre-up openvpn –mktun –dev tap1 post-up ip address add 0/0 dev tap1 post-up ip address add 0/0 dev ens19 post-up ip link set tap1 up post-up ip link set ens19 up post-up ip link set tap1 promisc on post-up ip link set ens19 promisc on bridge-ports tap1 ens19 bridge-fd 0 ==Server== + /etc/network/interfaces auto vmbr0 iface vmbr0 inet manual pre-up openvpn –mktun –dev tap1 post-up ip address add 0/0 dev ens20 post-up ip link set ens20 up post-up ip link set ens20 promisc on post-up ip address add 0/0 dev tap1 post-up ip link set tap1 up post-up ip link set tap1 promisc on bridge-ports tap1 ens20 bridge-stp off bridge-fd 0
+
=Netzwerkkonfiguration=
 +
==Client==
 +
auto vmbr0
 +
iface vmbr0 inet manual
 +
        bridge-ports none
 +
        bridge-stp off
 +
        pre-up openvpn --mktun --dev tap1
 +
        post-up ip address add 0/0 dev tap1
 +
        post-up ip address add 0/0 dev ens19
 +
        post-up ip link set tap1 up
 +
        post-up ip link set ens19 up
 +
        post-up ip link set tap1 promisc on
 +
        post-up ip link set ens19 promisc on
 +
        bridge-ports tap1 ens19
 +
        bridge-fd 0
 +
==Server==
 +
*/etc/network/interfaces
 +
auto vmbr0
 +
iface vmbr0 inet manual
 +
        pre-up openvpn --mktun --dev tap1
 +
        post-up ip address add 0/0 dev ens20
 +
        post-up ip link set ens20 up
 +
        post-up ip link set ens20 promisc on
 +
        post-up ip address add 0/0 dev tap1
 +
        post-up ip link set tap1 up
 +
        post-up ip link set tap1 promisc on
 +
        bridge-ports tap1 ens20
 +
        bridge-stp off
 +
        bridge-fd 0

Version vom 8. September 2022, 13:59 Uhr

Netzwerkkonfiguration

Client

auto vmbr0
iface vmbr0 inet manual
       bridge-ports none
       bridge-stp off
       pre-up openvpn --mktun --dev tap1
       post-up ip address add 0/0 dev tap1
       post-up ip address add 0/0 dev ens19
       post-up ip link set tap1 up
       post-up ip link set ens19 up
       post-up ip link set tap1 promisc on
       post-up ip link set ens19 promisc on
       bridge-ports tap1 ens19
       bridge-fd 0

Server

  • /etc/network/interfaces
auto vmbr0
iface vmbr0 inet manual
       pre-up openvpn --mktun --dev tap1
       post-up ip address add 0/0 dev ens20
       post-up ip link set ens20 up
       post-up ip link set ens20 promisc on
       post-up ip address add 0/0 dev tap1
       post-up ip link set tap1 up
       post-up ip link set tap1 promisc on
       bridge-ports tap1 ens20
       bridge-stp off
       bridge-fd 0
Abgerufen von „http://wiki.ixheim.de/index.php?title=OVPN_lan_to_lan_Bridge_Beispiel&oldid=34865“