OVPN lan to lan Bridge Beispiel: Unterschied zwischen den Versionen

Aus Xinux Wiki
Zur Navigation springen Zur Suche springen
Zeile 2: Zeile 2:
  
 
==Client==
 
==Client==
−
 
−
<pre>auto vmbr0
 
−
iface vmbr0 inet manual
 
−
bridge-ports none
 
−
bridge-stp off
 
−
pre-up openvpn --mktun --dev tap1
 
−
post-up ip address add 0/0 dev tap1
 
−
post-up ip address add 0/0 dev ens19
 
−
post-up ip link set tap1 up
 
−
post-up ip link set ens19 up
 
−
post-up ip link set tap1 promisc on
 
−
post-up ip link set ens19 promisc on
 
−
bridge-ports tap1 ens19
 
−
bridge-fd 0</pre>
 
−
==Server==
 
  
 
<ul>
 
<ul>
 
<li><p>/etc/network/interfaces</p>
 
<li><p>/etc/network/interfaces</p>
−
<p>auto vmbr0 iface vmbr0 inet manual pre-up openvpn –mktun –dev tap1 post-up ip address add 0/0 dev ens20 post-up ip link set ens20 up post-up ip link set ens20 promisc on post-up ip address add 0/0 dev tap1 post-up ip link set tap1 up post-up ip link set tap1 promisc on bridge-ports tap1 ens20 bridge-stp off bridge-fd 0</p></li></ul>
+
<p>auto vmbr0 iface vmbr0 inet manual bridge-ports none bridge-stp off pre-up openvpn –mktun –dev tap1 post-up ip address add 0/0 dev tap1 post-up ip address add 0/0 dev eth1 post-up ip link set tap1 up post-up ip link set eth1 up post-up ip link set tap1 promisc on post-up ip link set eth1 promisc on bridge-ports tap1 eth1 bridge-fd 0 ==Server==</p></li>
 +
<li><p>/etc/network/interfaces</p>
 +
<p>auto vmbr0 iface vmbr0 inet manual pre-up openvpn –mktun –dev tap1 post-up ip address add 0/0 dev eth1 post-up ip link set eth1 up post-up ip link set eth1 promisc on post-up ip address add 0/0 dev tap1 post-up ip link set tap1 up post-up ip link set tap1 promisc on bridge-ports tap1 eth1 bridge-stp off bridge-fd 0</p></li></ul>

Version vom 8. September 2022, 14:11 Uhr

Netzwerkkonfiguration

Client

  • /etc/network/interfaces

    auto vmbr0 iface vmbr0 inet manual bridge-ports none bridge-stp off pre-up openvpn –mktun –dev tap1 post-up ip address add 0/0 dev tap1 post-up ip address add 0/0 dev eth1 post-up ip link set tap1 up post-up ip link set eth1 up post-up ip link set tap1 promisc on post-up ip link set eth1 promisc on bridge-ports tap1 eth1 bridge-fd 0 ==Server==

  • /etc/network/interfaces

    auto vmbr0 iface vmbr0 inet manual pre-up openvpn –mktun –dev tap1 post-up ip address add 0/0 dev eth1 post-up ip link set eth1 up post-up ip link set eth1 promisc on post-up ip address add 0/0 dev tap1 post-up ip link set tap1 up post-up ip link set tap1 promisc on bridge-ports tap1 eth1 bridge-stp off bridge-fd 0

Abgerufen von „http://wiki.ixheim.de/index.php?title=OVPN_lan_to_lan_Bridge_Beispiel&oldid=34874“