Gre tunnel linux: Unterschied zwischen den Versionen

Aus Xinux Wiki
Zur Navigation springen Zur Suche springen
Zeile 34: Zeile 34:
 
  net.ipv4.ip_forward=1
 
  net.ipv4.ip_forward=1
 
*sysctl -p
 
*sysctl -p
=Manual=
 
==garlic==
 
*ip tunnel add gretun mode gre remote 10.82.1.195 local 10.82.1.211 ttl 255
 
*ip address add dev gretun 172.30.30.1 peer 172.30.30.2/32
 
*ip link set gretun up
 
*ip route add 192.168.55.0/24 via 172.30.30.2
 
==hubsi==
 
*ip tunnel add gretun mode gre remote 10.82.1.211 local 10.82.1.195  ttl 255
 
*ip address add dev gretun 172.30.30.2 peer 172.30.30.1/32
 
*ip link set gretun up
 
*ip route add 192.168.33.0/24 via 172.30.30.1
 
 
=Static=
 
=Static=
 
==garlic==
 
==garlic==

Version vom 8. September 2022, 17:00 Uhr

Layout

-192.168.33.1/24 -|garlic|-10.82.1.211---------------------10.82.1.195-|hubsi|-192.168.55.1/24

Interfaces

garlic

auto ens18
iface ens18 inet static
 address 10.82.1.211
 netmask 255.255.0.0
 gateway 10.82.0.1

auto dummy0
iface dummy0 inet static
 address 192.168.33.1
 netmask 255.255.255.0
 pre-up ip link add dummy0 type dummy

hubsi

auto ens18
iface ens18 inet static
 address 10.82.1.195
 netmask 255.255.0.0
 gateway 10.82.0.1

auto dummy0
iface dummy0 inet static
 address 192.168.55.1
 netmask 255.255.255.0
 pre-up ip link add dummy0 type dummy

Ipfordward on

  • cat /etc/sysctl.conf
net.ipv4.ip_forward=1
  • sysctl -p

Static

garlic

auto  gretun
iface gretun inet static
  address 172.30.30.1
  pointopoint 172.30.30.2
  pre-up ip tunnel add gretun mode gre remote 10.82.1.195 local 10.82.1.211 ttl 255
  post-up ip route add 192.168.55.0/24 via 172.30.30.2

hubsi

auto  gretun
iface gretun inet static
  address 172.30.30.2
  pointopoint 172.30.30.1
  pre-up ip tunnel add gretun mode gre remote 10.82.1.211 local 10.82.1.195 ttl 255
  post-up ip route add 192.168.33.0/24 via 172.30.30.1