NTP: Unterschied zwischen den Versionen

Aus Xinux Wiki
Zur Navigation springen Zur Suche springen
Admin (Diskussion | Beiträge)
Der Seiteninhalt wurde durch einen anderen Text ersetzt: „*ntp client“
Markierung: Ersetzt
 
(22 dazwischenliegende Versionen von 4 Benutzern werden nicht angezeigt)
Zeile 1: Zeile 1:
Das Network Time Protocol (NTP) ist ein Standard zur Synchronisierung von Uhren in Computersystemen über
*[[ntp client]]
paketbasierte Kommunikationsnetze. NTP verwendet das verbindungslose Transportprotokoll UDP (Port 123).
 
==Installation des Clients==
root@zero:~# apt-get install ntp
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut
Lese Status-Informationen ein... Fertig
Vorgeschlagene Pakete:
  ntp-doc
Die folgenden NEUEN Pakete werden installiert:
  ntp
...
 
==Konfiguration==
Nach der Installation ist keine weitere Konfiguration notwendig. Unter Ubuntu ist standardmäßig als NTP-Server
ntp.ubuntu.com eingetragen. Die Konfigurationsdatei liegt unter /etc/ntp.conf
# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
driftfile /var/lib/ntp/ntp.drift
# Enable this if you want statistics to be logged.
#statsdir /var/log/ntpstats/
statistics loopstats peerstats clockstats
filegen loopstats file loopstats type day enable
filegen peerstats file peerstats type day enable
filegen clockstats file clockstats type day enable
# You do need to talk to an NTP server or two (or three).
server ntp.ubuntu.com
...
 
Weitere Server können hinzugefügt werden.
server pool.ntp.org            Serverpool ntp.org
server ptbtime1.ptb.de Physikalisch-Technische Bundesanstalt (Braunschweig)
server ptbtime2.ptb.de Physikalisch-Technische Bundesanstalt, alternativer Server
server time.windows.com        Windows Zeitserver
 
==Manuelle Synchronisation==
ntpdate [NTP-Server]
/etc/init.d/ntp muss dazu gestoppt sein
Die Systemzeit kann manuell mit ntpdate synchronisiert werden. Wenn der NTP Daemon läuft sollte dies nicht erforderlich
sein.
 
Beispiel
root@zero:~# ntpdate pool.ntp.org
6 Jul 14:53:12 ntpdate[8959]: adjust time server 78.46.73.8 offset -0.018683 sec
 
==Lokaler NTP Server==
Für ein LAN kann ein Unix-Rechner mit einem NTP Client die Zeit weitergeben, die er selbst von einem NTP Server bezogen hat.
Dazu muss in /etc/ntp.conf der Zugriff für das entsprechende Netz erlaubt werden. Es dauert einige Zeit, bis der Server als
"suitable" (dt. geeignet) gelistet wird.
 
/etc/ntp.conf
# You do need to talk to an NTP server or two (or three).
server ntp.ubuntu.com
...
# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
# might also be helpful.
#
# Note that "restrict" applies to both servers and clients, so a configuration
# that might be intended to block requests from certain clients could also end
# up blocking replies from your own upstream servers.
# By default, exchange time with everybody, but don't allow configuration.
#restrict -4 default kod notrap nomodify nopeer noquery
#restrict -6 default kod notrap nomodify nopeer noquery
restrict 192.168.240.0 netmask 255.255.240.0 nomodify
...
 
===Test===
root@zero:~# ntpdate 192.168.242.1
7 Jul 09:57:54 ntpdate[1519]: step time server 192.168.242.1 offset -328.693068 sec

Aktuelle Version vom 13. Februar 2023, 13:55 Uhr