OPENVPN SITE TO SITE PSK: Unterschied zwischen den Versionen

Aus Xinux Wiki
Zur Navigation springen Zur Suche springen
 
Zeile 1: Zeile 1:
 
=Layout=
 
=Layout=
 
-192.168.33.1/24 -|garlic|-10.82.1.211---------------------10.82.1.195-|hubsi|-192.168.55.1/24
 
-192.168.33.1/24 -|garlic|-10.82.1.211---------------------10.82.1.195-|hubsi|-192.168.55.1/24
 +
 +
{{#drawio:openvpn-05}}
 +
 
=Interfaces=
 
=Interfaces=
  

Aktuelle Version vom 11. Juli 2023, 14:48 Uhr

Layout

-192.168.33.1/24 -|garlic|-10.82.1.211---------------------10.82.1.195-|hubsi|-192.168.55.1/24

Interfaces

Dummy, pseudo Interface

garlic

auto ens18
iface ens18 inet static
 address 10.82.1.211
 netmask 255.255.0.0
 gateway 10.82.0.1

auto dummy0
iface dummy0 inet static
 address 192.168.33.1
 netmask 255.255.255.0
 pre-up ip link add dummy0 type dummy

hubsi

auto ens18
iface ens18 inet static
 address 10.82.1.195
 netmask 255.255.0.0
 gateway 10.82.0.1

auto dummy0
iface dummy0 inet static
 address 192.168.55.1
 netmask 255.255.255.0
 pre-up ip link add dummy0 type dummy

Ipfordward on

  • cat /etc/sysctl.conf
net.ipv4.ip_forward=1
  • sysctl -p

Openvpn

Install

  • sudo apt-get install openvpn

Generatre PSK on garlic

  • cd /etc/openvpn/
  • openvpn --genkey secret static.key

Copy to hubsi

  • scp static.key hubsi:$PWD

Openvpn config on garlic

  • vi /etc/openvpn/server.conf
remote 10.82.1.195
dev tun
ifconfig 172.30.30.1 172.30.30.2
secret static.key
route 192.168.55.0 255.255.255.0
keepalive 10 120

Openvpn config on hubsi

  • vi /etc/openvpn/client.conf
remote 10.82.1.211
dev tun
ifconfig 172.30.30.2 172.30.30.1
secret static.key
route 192.168.33.0 255.255.255.0
keepalive 10 120

Start and Autostart on all sites

  • echo 'AUTOSTART="all"' >> /etc/default/openvpn
  • systemctl daemon-reload
  • systemctl start openvpn
  • systemctl enable openvpn
Abgerufen von „http://wiki.ixheim.de/index.php?title=OPENVPN_SITE_TO_SITE_PSK&oldid=48115“