Bridge utils config für Virtualbox Debian: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
| Zeile 14: | Zeile 14: | ||
bridge_fd 5 | bridge_fd 5 | ||
bridge_stp no | bridge_stp no | ||
| − | post-up iptables -t nat -j POSTROUTING -s 192.168.16.0/24 -j | + | post-up iptables -t nat -j POSTROUTING -s 192.168.16.0/24 -j MASQUERADE |
post-up echo 1 > /proc/sys/net/ipv4/ip_forward | post-up echo 1 > /proc/sys/net/ipv4/ip_forward | ||
</pre> | </pre> | ||
| + | |||
=Danach= | =Danach= | ||
*ifup -v vmbr0 | *ifup -v vmbr0 | ||
Version vom 13. März 2026, 07:08 Uhr
Installation
- apt install bridge-utils iptables dnsmasq
Muss in die /etc/network/interfaces
auto dummy0
iface dummy0 inet manual
pre-up modprobe dummy numdummies=1
auto vmbr0
iface vmbr0 inet static
address 192.168.16.254
netmask 255.255.255.0
bridge_ports dummy0
bridge_fd 5
bridge_stp no
post-up iptables -t nat -j POSTROUTING -s 192.168.16.0/24 -j MASQUERADE
post-up echo 1 > /proc/sys/net/ipv4/ip_forward
Danach
- ifup -v vmbr0