Cisco Configuration Professional

Connect to your router using Telnet, SSH, or through the console.

Enter global configuration mode using this command:

       Router(config)#enable
       Router(config)#

If HTTP and HTTPS are enabled and configured to use nonstandard port numbers, you can skip this step and simply use the port number already configured.

Enable the router HTTP or HTTPS server using these Cisco IOS Software commands:

       Router(config)# ip http server
       Router(config)# ip http secure-server
       Router(config)# ip http authentication local

Create a user with privilege level 15:

       Router(config)# username <username> privilege 15 password 0 <password>

Note: Replace <username> and <password> with the username and password that you want to configure. Do not use the same password for your user and enable passwords.

Configure SSH and Telnet for local login and privilege level 15.

       Router(config)# line vty 0 4
       Router(config-line)# privilege level 15
       Router(config-line)# login local   # FUNKTIONIERT BEIM 2651XM NICHT
       Router(config-line)# transport input telnet
       Router(config-line)# transport input telnet ssh
       Router(config-line)# exit

(Optional) Enable local logging to support the log monitoring function:

       Router(config)# logging buffered 51200 warning