Cisco VLAN-Trunking Protocol: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
Thomas (Diskussion | Beiträge) |
Thomas (Diskussion | Beiträge) |
||
| Zeile 12: | Zeile 12: | ||
**VTP Client | **VTP Client | ||
**VTP Transparent | **VTP Transparent | ||
| + | =Anzeigen Vlans?= | ||
| + | *switch-gelb#show vlan brief | ||
| + | <pre> | ||
| + | VLAN Name Status Ports | ||
| + | ---- -------------------------------- --------- ------------------------------- | ||
| + | 1 default active Fa1/0/1, Fa1/0/2, Fa1/0/3, Fa1/0/6, Fa1/0/7, Fa1/0/8, Fa1/0/12 | ||
| + | Fa1/0/18, Fa1/0/19, Fa1/0/20, Fa1/0/21, Fa1/0/22, Fa1/0/23 | ||
| + | Fa1/0/24, Fa1/0/25, Fa1/0/26, Fa1/0/27, Fa1/0/28, Fa1/0/29 | ||
| + | Fa1/0/30, Fa1/0/31, Fa1/0/32, Fa1/0/33, Fa1/0/34, Fa1/0/35 | ||
| + | Fa1/0/36, Fa1/0/37, Fa1/0/38, Fa1/0/39, Fa1/0/40, Fa1/0/41 | ||
| + | Fa1/0/42, Fa1/0/43, Fa1/0/44, Fa1/0/45, Fa1/0/46, Fa1/0/47 | ||
| + | Gi1/0/1, Gi1/0/2, Gi1/0/3, Gi1/0/4 | ||
| + | 10 office active Fa1/0/4, Fa1/0/5 | ||
| + | 20 work active Fa1/0/9, Fa1/0/10, Fa1/0/11 | ||
| + | 30 labor active Fa1/0/13, Fa1/0/14, Fa1/0/15, Fa1/0/16, Fa1/0/17 | ||
| + | 1002 fddi-default act/unsup | ||
| + | 1003 token-ring-default act/unsup | ||
| + | 1004 fddinet-default act/unsup | ||
| + | 1005 trnet-default act/unsup | ||
| + | </pre> | ||
| + | *switch-rot#show vlan brief | ||
| + | <pre> | ||
| + | VLAN Name Status Ports | ||
| + | ---- -------------------------------- --------- ------------------------------- | ||
| + | 1 default active Gi1/0/1, Gi1/0/2, Gi1/0/15 | ||
| + | Gi1/0/16, Gi1/0/17, Gi1/0/18 | ||
| + | Gi1/0/19, Gi1/0/20, Gi1/0/21 | ||
| + | Gi1/0/22, Gi1/0/23, Gi1/0/25 | ||
| + | Gi1/0/26, Gi1/0/27, Gi1/0/28 | ||
| + | 10 office active Gi1/0/3, Gi1/0/4, Gi1/0/5 | ||
| + | Gi1/0/6 | ||
| + | 20 work active Gi1/0/7, Gi1/0/8, Gi1/0/9 | ||
| + | Gi1/0/10 | ||
| + | 30 labor active Gi1/0/11, Gi1/0/12, Gi1/0/13 | ||
| + | Gi1/0/14 | ||
| + | 1002 fddi-default act/unsup | ||
| + | 1003 token-ring-default act/unsup | ||
| + | 1004 fddinet-default act/unsup | ||
| + | 1005 trnet-default act/unsup | ||
| + | </pre> | ||
| + | =Löschen der Vlans= | ||
| + | *switch-rot#configure terminal | ||
| + | Enter configuration commands, one per line. End with CNTL/Z. | ||
| + | *switch-rot(config)#no vlan 10 | ||
| + | *switch-rot(config)#no vlan 20 | ||
| + | *switch-rot(config)#no vlan 30 | ||
| + | *switch-rot(config)#do show vlan brief | ||
| + | <pre> | ||
| + | VLAN Name Status Ports | ||
| + | ---- -------------------------------- --------- ------------------------------- | ||
| + | 1 default active Gi1/0/1, Gi1/0/2, Gi1/0/15 | ||
| + | Gi1/0/16, Gi1/0/17, Gi1/0/18 | ||
| + | Gi1/0/19, Gi1/0/20, Gi1/0/21 | ||
| + | Gi1/0/22, Gi1/0/23, Gi1/0/25 | ||
| + | Gi1/0/26, Gi1/0/27, Gi1/0/28 | ||
| + | 1002 fddi-default act/unsup | ||
| + | 1003 token-ring-default act/unsup | ||
| + | 1004 fddinet-default act/unsup | ||
| + | 1005 trnet-default act/unsup | ||
| + | </pre> | ||
Version vom 1. Februar 2016, 14:36 Uhr
Was ist VTP
- Synchronistation der Vlans über Switches hinweg.
- Verwaltungsaufwand wird reduziert
- Kann zu Fehlern führen
- Austausch von
- Vlan ID
- Vlan Name
- Kein Austausch von
- Vlan Inetrface Zuordnungen
- VTP MODI
- VTP Server
- VTP Client
- VTP Transparent
Anzeigen Vlans?
- switch-gelb#show vlan brief
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa1/0/1, Fa1/0/2, Fa1/0/3, Fa1/0/6, Fa1/0/7, Fa1/0/8, Fa1/0/12
Fa1/0/18, Fa1/0/19, Fa1/0/20, Fa1/0/21, Fa1/0/22, Fa1/0/23
Fa1/0/24, Fa1/0/25, Fa1/0/26, Fa1/0/27, Fa1/0/28, Fa1/0/29
Fa1/0/30, Fa1/0/31, Fa1/0/32, Fa1/0/33, Fa1/0/34, Fa1/0/35
Fa1/0/36, Fa1/0/37, Fa1/0/38, Fa1/0/39, Fa1/0/40, Fa1/0/41
Fa1/0/42, Fa1/0/43, Fa1/0/44, Fa1/0/45, Fa1/0/46, Fa1/0/47
Gi1/0/1, Gi1/0/2, Gi1/0/3, Gi1/0/4
10 office active Fa1/0/4, Fa1/0/5
20 work active Fa1/0/9, Fa1/0/10, Fa1/0/11
30 labor active Fa1/0/13, Fa1/0/14, Fa1/0/15, Fa1/0/16, Fa1/0/17
1002 fddi-default act/unsup
1003 token-ring-default act/unsup
1004 fddinet-default act/unsup
1005 trnet-default act/unsup
- switch-rot#show vlan brief
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Gi1/0/1, Gi1/0/2, Gi1/0/15
Gi1/0/16, Gi1/0/17, Gi1/0/18
Gi1/0/19, Gi1/0/20, Gi1/0/21
Gi1/0/22, Gi1/0/23, Gi1/0/25
Gi1/0/26, Gi1/0/27, Gi1/0/28
10 office active Gi1/0/3, Gi1/0/4, Gi1/0/5
Gi1/0/6
20 work active Gi1/0/7, Gi1/0/8, Gi1/0/9
Gi1/0/10
30 labor active Gi1/0/11, Gi1/0/12, Gi1/0/13
Gi1/0/14
1002 fddi-default act/unsup
1003 token-ring-default act/unsup
1004 fddinet-default act/unsup
1005 trnet-default act/unsup
Löschen der Vlans
- switch-rot#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
- switch-rot(config)#no vlan 10
- switch-rot(config)#no vlan 20
- switch-rot(config)#no vlan 30
- switch-rot(config)#do show vlan brief
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Gi1/0/1, Gi1/0/2, Gi1/0/15
Gi1/0/16, Gi1/0/17, Gi1/0/18
Gi1/0/19, Gi1/0/20, Gi1/0/21
Gi1/0/22, Gi1/0/23, Gi1/0/25
Gi1/0/26, Gi1/0/27, Gi1/0/28
1002 fddi-default act/unsup
1003 token-ring-default act/unsup
1004 fddinet-default act/unsup
1005 trnet-default act/unsup