Version vom 7. April 2016, 11:34 Uhr

Cisco Router Grundlagen

*Cisco Router Diagnose

unkerich#configure terminal 
unkerich(config)#ip http server 
unkerich(config)#exit
unkerich#

@@ Zeile 30: / Zeile 30: @@
 *[[Cisco Router PPPOE]]
-===NAT konfigurieren===
- Router(config)# ip nat pool pool1 192.168.1.0 192.168.2.0 netmask 0.0.0.255
- Router(config)# ip nat inside source list 1 interface dialer 0 overload
-oder
- Router(config)# ip nat inside source list acl1 pool pool1
- Router(config)# interface vlan 1
- Router(config-if)# ip nat inside
- Router(config-if)# no shutdown
- Router(config-if)# exit
- Router(config)#interface fastethernet 0
- Router(config-if)# ip nat outside
- Router(config-if)# no shutdown
- Router(config-if)# exit
- Router(config)# access-list 1 permit 192.168.1.0 0.0.0.255
 ==Links==
 [http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080094498.shtml IPsec von Cisco Router zu Cisco PIX VPN]