Hot Standby Router Protocol (HSRP): Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
Thomas (Diskussion | Beiträge) |
Thomas (Diskussion | Beiträge) (→c2651) |
||
| Zeile 34: | Zeile 34: | ||
end | end | ||
</pre> | </pre> | ||
| − | + | =Kontrolle= | |
| − | + | *c1841#show standby | |
| + | FastEthernet0/1 - Group 1 | ||
| + | State is Active | ||
| + | 2 state changes, last state change 00:12:40 | ||
| + | Virtual IP address is 10.20.30.1 | ||
| + | Active virtual MAC address is 0000.0c07.ac01 | ||
| + | Local virtual MAC address is 0000.0c07.ac01 (v1 default) | ||
| + | Hello time 3 sec, hold time 10 sec | ||
| + | Next hello sent in 1.624 secs | ||
| + | Preemption enabled | ||
| + | Active router is local | ||
| + | Standby router is 10.20.30.3, priority 105 (expires in 9.800 sec) | ||
| + | Priority 110 (configured 110) | ||
| + | IP redundancy name is "hsrp-Fa0/1-1" (default) | ||
| + | *c2651#show standby | ||
| + | FastEthernet0/1 - Group 1 | ||
| + | State is Standby | ||
| + | 4 state changes, last state change 00:08:19 | ||
| + | Virtual IP address is 10.20.30.1 | ||
| + | Active virtual MAC address is 0000.0c07.ac01 | ||
| + | Local virtual MAC address is 0000.0c07.ac01 (v1 default) | ||
| + | Hello time 3 sec, hold time 10 sec | ||
| + | Next hello sent in 1.750 secs | ||
| + | Preemption disabled | ||
| + | Active router is 10.20.30.2, priority 110 (expires in 7.556 sec) | ||
| + | Standby router is local | ||
| + | Priority 105 (configured 105) | ||
| + | IP redundancy name is "hsrp-Fa0/1-1" (default) | ||
=Links= | =Links= | ||
*http://www.cisco.com/c/en/us/support/docs/ip/hot-standby-router-protocol-hsrp/13780-6.html | *http://www.cisco.com/c/en/us/support/docs/ip/hot-standby-router-protocol-hsrp/13780-6.html | ||
Version vom 7. April 2016, 12:19 Uhr
c1841
c1841#show run interface fastEthernet 0/1 Building configuration... Current configuration : 201 bytes ! interface FastEthernet0/1 ip address 10.20.30.2 255.255.255.0 ip nat inside ip virtual-reassembly duplex auto speed auto standby 1 ip 10.20.30.1 standby 1 priority 110 standby 1 preempt end
c2651
c2651#show run interface fastEthernet 0/1 Building configuration... Current configuration : 182 bytes ! interface FastEthernet0/1 ip address 10.20.30.3 255.255.255.0 ip nat inside ip virtual-reassembly duplex auto speed auto standby 1 ip 10.20.30.1 standby 1 priority 105 end
Kontrolle
- c1841#show standby
FastEthernet0/1 - Group 1 State is Active 2 state changes, last state change 00:12:40 Virtual IP address is 10.20.30.1 Active virtual MAC address is 0000.0c07.ac01 Local virtual MAC address is 0000.0c07.ac01 (v1 default) Hello time 3 sec, hold time 10 sec Next hello sent in 1.624 secs Preemption enabled Active router is local Standby router is 10.20.30.3, priority 105 (expires in 9.800 sec) Priority 110 (configured 110) IP redundancy name is "hsrp-Fa0/1-1" (default)
- c2651#show standby
FastEthernet0/1 - Group 1
State is Standby 4 state changes, last state change 00:08:19 Virtual IP address is 10.20.30.1 Active virtual MAC address is 0000.0c07.ac01 Local virtual MAC address is 0000.0c07.ac01 (v1 default) Hello time 3 sec, hold time 10 sec Next hello sent in 1.750 secs Preemption disabled Active router is 10.20.30.2, priority 110 (expires in 7.556 sec) Standby router is local Priority 105 (configured 105) IP redundancy name is "hsrp-Fa0/1-1" (default)