Procurve Vlan: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
Thomas (Diskussion | Beiträge) |
Thomas (Diskussion | Beiträge) |
||
| (9 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt) | |||
| Zeile 1: | Zeile 1: | ||
| + | =Routing aktivieren= | ||
| + | *ip routing | ||
| + | =Routing deaktivieren= | ||
| + | *no ip routing | ||
| + | =Default Route bei Layer 3 Funktion= | ||
| + | !!!Wichtig | ||
| + | *ip route 0.0.0.0 0.0.0.0 192.168.240.100 | ||
| + | |||
=Vlan anlegen= | =Vlan anlegen= | ||
*configure terminal | *configure terminal | ||
| Zeile 10: | Zeile 18: | ||
=Vlans anzeigen= | =Vlans anzeigen= | ||
| + | *show vlans | ||
<pre> | <pre> | ||
Status and Counters - VLAN Information | Status and Counters - VLAN Information | ||
| Zeile 28: | Zeile 37: | ||
300 manag-vlan No No | 300 manag-vlan No No | ||
</pre> | </pre> | ||
| + | =IP Adressen vergeben= | ||
| + | *configure terminal | ||
| + | *vlan 100 | ||
| + | *ip address 172.24.10.1 255.255.255.0 | ||
| + | *vlan 200 | ||
| + | *ip address 172.24.20.1 255.255.255.0 | ||
| + | *vlan 300 | ||
| + | *ip address 172.24.30.1 255.255.255.0 | ||
| + | *end | ||
| + | =Untagged Interface zu Vlan hinzufügen= | ||
| + | *configure terminal | ||
| + | *vlan 100 | ||
| + | *untagged 2-5 | ||
| + | *end | ||
| + | =VLANs pro Interface= | ||
| + | *show vlans ports 3 | ||
| + | <pre> | ||
| + | Status and Counters - VLAN Information - for ports 3 | ||
| + | |||
| + | 802.1Q VLAN ID Name Status Voice Jumbo | ||
| + | -------------- ------------ ---------- ----- ----- | ||
| + | 100 work-vlan No No | ||
| + | </pre> | ||
| + | =Taged Vlan vom anderen Switch weiterleiten= | ||
| + | *configure terminal | ||
| + | *vlan 10 | ||
| + | *tagged 1 | ||
| + | *untagged 24 | ||
| + | *end | ||
=Zurück= | =Zurück= | ||
*[[HP Procurve]] | *[[HP Procurve]] | ||
| + | =Links= | ||
| + | *http://whp-aus1.cold.extweb.hp.com/pub/networking/software/AdvTraff-Oct2005-59908853-Chap02-VLAN.pdf | ||
Aktuelle Version vom 13. April 2016, 08:26 Uhr
Routing aktivieren
- ip routing
Routing deaktivieren
- no ip routing
Default Route bei Layer 3 Funktion
!!!Wichtig
- ip route 0.0.0.0 0.0.0.0 192.168.240.100
Vlan anlegen
- configure terminal
- vlan 100
- name work-vlan
- vlan 200
- name it-vlan
- vlan 300
- name manag-vlan
- end
Vlans anzeigen
- show vlans
Status and Counters - VLAN Information Maximum VLANs to support : 8 Primary VLAN : DEFAULT_VLAN Management VLAN : 802.1Q VLAN ID Name Status Voice Jumbo -------------- ------------ ---------- ----- ----- 1 DEFAULT_VLAN No No 2 Vlan 10 No No 3 Vlan 20 No No 4 Vlan 30 No No 5 Vlan 40 No No 100 work-vlan No No 200 it-vlan No No 300 manag-vlan No No
IP Adressen vergeben
- configure terminal
- vlan 100
- ip address 172.24.10.1 255.255.255.0
- vlan 200
- ip address 172.24.20.1 255.255.255.0
- vlan 300
- ip address 172.24.30.1 255.255.255.0
- end
Untagged Interface zu Vlan hinzufügen
- configure terminal
- vlan 100
- untagged 2-5
- end
VLANs pro Interface
- show vlans ports 3
Status and Counters - VLAN Information - for ports 3 802.1Q VLAN ID Name Status Voice Jumbo -------------- ------------ ---------- ----- ----- 100 work-vlan No No
Taged Vlan vom anderen Switch weiterleiten
- configure terminal
- vlan 10
- tagged 1
- untagged 24
- end