Cisco Mac Authentication Bypass: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
Thomas (Diskussion | Beiträge) |
Thomas (Diskussion | Beiträge) |
||
| Zeile 12: | Zeile 12: | ||
*config terminal | *config terminal | ||
*interface GigabitEthernet1/0/24 | *interface GigabitEthernet1/0/24 | ||
| − | *switchport access vlan 1 | + | **switchport access vlan 1 |
| − | *switchport mode access | + | **switchport mode access |
| − | *authentication port-control auto | + | **authentication port-control auto |
| − | *mab | + | **mab |
| − | *spanning-tree portfast | + | **spanning-tree portfast |
| − | *spanning-tree bpduguard enable | + | **spanning-tree bpduguard enable |
| + | **end | ||
=Links= | =Links= | ||
*http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/identity-based-networking-services/config_guide_c17-663759.html | *http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/identity-based-networking-services/config_guide_c17-663759.html | ||
Aktuelle Version vom 25. April 2016, 11:14 Uhr
Radiusanbindung
Allgemeine Konfiguration
- aaa new-model
- aaa authentication dot1x default group radius
- aaa authorization network default group radius
- aaa accounting dot1x default start-stop group radius
Interface
- config terminal
- interface GigabitEthernet1/0/24
- switchport access vlan 1
- switchport mode access
- authentication port-control auto
- mab
- spanning-tree portfast
- spanning-tree bpduguard enable
- end