Cisco Portmirroring: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
Thomas (Diskussion | Beiträge) (Die Seite wurde neu angelegt: „*http://www.nwlab.net/tutorials/cisco/port-mirroring.html“) |
Thomas (Diskussion | Beiträge) |
||
| (3 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt) | |||
| Zeile 1: | Zeile 1: | ||
| + | =Setzen der Mirroring= | ||
| + | ==Port als Quelle== | ||
| + | *configure terminal | ||
| + | **no monitor session 1 | ||
| + | **monitor session 1 source interface FastEthernet0/5 | ||
| + | **monitor session 1 destination interface FastEthernet0/1 | ||
| + | **end | ||
| + | ==Vlan als Quelle== | ||
| + | *configure terminal | ||
| + | **monitor session 1 source vlan 99 | ||
| + | **monitor session 1 destination interface Gi1/0/38 | ||
| + | **end | ||
| + | |||
| + | =Anzeigen der Mirrorsession= | ||
| + | *show monitor session 1 | ||
| + | <pre> | ||
| + | Session 1 | ||
| + | --------- | ||
| + | Type : Local Session | ||
| + | Source Ports : | ||
| + | RX Only : None | ||
| + | TX Only : None | ||
| + | Both : Fa0/5 | ||
| + | Source VLANs : | ||
| + | RX Only : None | ||
| + | TX Only : None | ||
| + | Both : None | ||
| + | Source RSPAN VLAN : None | ||
| + | Destination Ports : Fa0/1 | ||
| + | Reflector Port : None | ||
| + | Filter VLANs : None | ||
| + | Dest RSPAN VLAN : None | ||
| + | </pre> | ||
| + | |||
| + | |||
| + | =Links= | ||
| + | *http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_55_se/configuration/guide/scg_2960/swspan.html | ||
*http://www.nwlab.net/tutorials/cisco/port-mirroring.html | *http://www.nwlab.net/tutorials/cisco/port-mirroring.html | ||
Aktuelle Version vom 16. Juni 2016, 17:14 Uhr
Setzen der Mirroring
Port als Quelle
- configure terminal
- no monitor session 1
- monitor session 1 source interface FastEthernet0/5
- monitor session 1 destination interface FastEthernet0/1
- end
Vlan als Quelle
- configure terminal
- monitor session 1 source vlan 99
- monitor session 1 destination interface Gi1/0/38
- end
Anzeigen der Mirrorsession
- show monitor session 1
Session 1
---------
Type : Local Session
Source Ports :
RX Only : None
TX Only : None
Both : Fa0/5
Source VLANs :
RX Only : None
TX Only : None
Both : None
Source RSPAN VLAN : None
Destination Ports : Fa0/1
Reflector Port : None
Filter VLANs : None
Dest RSPAN VLAN : None