Xl2tpd-strongswan: Unterschied zwischen den Versionen

Aus Xinux Wiki
Zur Navigation springen Zur Suche springen
Praktikum (Diskussion | Beiträge)
Niklas.guenauer (Diskussion | Beiträge)
 
(10 dazwischenliegende Versionen von 2 Benutzern werden nicht angezeigt)
Zeile 15: Zeile 15:
     right=%any
     right=%any


===ipsec.secrets complete===


  cat /etc/ipsec.secrets  
  cat /etc/ipsec.secrets  
  XXX.XXX.XXX.XXX  %any : PSK "1234"
 
  10.84.252.32 %any : PSK "1234"
 
'''Wichtig dieser Eintrag muss am Ende stehen'''


==XL2TP==
==XL2TP==
  cat /etc/xl2tpd/xl2tpd.conf  
  cat /etc/xl2tpd/xl2tpd.conf  
 
<pre>
  [global]
  [global]
#important when more then one ips on the nic
#listen-addr = XXX.XXX.XXX.XXX
  ipsec saref = yes
  ipsec saref = yes
  debug avp = yes
  debug avp = yes
Zeile 31: Zeile 32:
  debug state = yes
  debug state = yes
  debug tunnel = yes
  debug tunnel = yes
 
  [lns default]
  [lns default]
  ip range = 10.1.2.2-10.1.2.255
  ip range = 10.1.2.2-10.1.2.255
Zeile 41: Zeile 42:
  pppoptfile = /etc/ppp/options.xl2tpd
  pppoptfile = /etc/ppp/options.xl2tpd
  length bit = yes
  length bit = yes
</pre>


==PPP==
==PPP==
  cat /etc/ppp/options.xl2tpd
  cat /etc/ppp/options.xl2tpd
<pre>
  require-mschap-v2
  require-mschap-v2
  ms-dns 192.168.240.21
  ms-dns 192.168.240.21
Zeile 50: Zeile 52:
  asyncmap 0
  asyncmap 0
  auth
  auth
  crtscts
  #crtscts nicht vorhanden in 5.6.2-1ubuntu2.4
  lock
  #lock nicht vorhanden in 5.6.2-1ubuntu2.4
  hide-password
  hide-password
  modem
  #modem nicht vorhanden in 5.6.2-1ubuntu2.4
  #for ppp3  
  #for ppp3  
  unit 3
  unit 3
Zeile 61: Zeile 63:
  lcp-echo-interval 30
  lcp-echo-interval 30
  lcp-echo-failure 4
  lcp-echo-failure 4
 
</pre>
  cat /etc/ppp/chap-secrets  
  cat /etc/ppp/chap-secrets  
<pre>
  xinux        l2tpd      "geheimes-passwort"       *
  xinux        l2tpd      "geheimes-passwort"       *
  #l2tpd        xinux   "geheimes-passwort"       *
  #l2tpd        xinux   "geheimes-passwort"       *
</pre>
=Starten=
*systemctl restart strongswan
*systemctl restart xl2tpd

Aktuelle Version vom 12. November 2019, 11:48 Uhr

Installation

apt-get install  xl2tpd ppp strongswan

strongswan

ipsec.conf complete

conn l2tp
    keyexchange=ikev1
    left=10.84.252.32
    auto=add
    authby=secret
    type=transport
    leftprotoport=17/1701
    rightprotoport=17/%any
    right=%any

ipsec.secrets complete

cat /etc/ipsec.secrets 
10.84.252.32 %any : PSK "1234"

Wichtig dieser Eintrag muss am Ende stehen

XL2TP

cat /etc/xl2tpd/xl2tpd.conf 
 [global]
 ipsec saref = yes
 debug avp = yes
 debug network = yes
 debug state = yes
 debug tunnel = yes

 [lns default]
 ip range = 10.1.2.2-10.1.2.255
 local ip = 10.1.2.1
 refuse chap = yes
 refuse pap = yes
 require authentication = yes
 ppp debug = yes
 pppoptfile = /etc/ppp/options.xl2tpd
 length bit = yes

PPP

cat /etc/ppp/options.xl2tpd
 
 require-mschap-v2
 ms-dns 192.168.240.21
 ms-dns 192.168.240.22
 asyncmap 0
 auth
 #crtscts nicht vorhanden in 5.6.2-1ubuntu2.4 
 #lock nicht vorhanden in 5.6.2-1ubuntu2.4 
 hide-password
 #modem nicht vorhanden in 5.6.2-1ubuntu2.4 
 #for ppp3 
 unit 3
 debug
 name l2tpd
 proxyarp
 lcp-echo-interval 30
 lcp-echo-failure 4
cat /etc/ppp/chap-secrets 
 
 xinux        l2tpd       "geheimes-passwort"	       *
 #l2tpd        xinux	  "geheimes-passwort"	       *

Starten

  • systemctl restart strongswan
  • systemctl restart xl2tpd