Aktuelle Version vom 4. November 2021, 14:58 Uhr

@@ Zeile 14: / Zeile 14: @@
 *[[Cisco Configuration Professional]]
 =Diagnose=
- *[[Cisco Router Diagnose]]
+*[[Cisco Router Diagnose]]
+=DHCP einrichten=
-==Misc==
-===Webserver aktivieren===
- unkerich#configure terminal
- unkerich(config)#ip http server
- unkerich(config)#exit
- unkerich#
-===DHCP einrichten===
 *[[Cisco DHCP SERVER]]
+=Cisco 1800 pppoe (nur für 1811/12?)=
-==Cisco 1800 pppoe (nur für 1811/12?)==
 *[[Cisco Router PPPOE]]
+=Hot Standby Router Protocol (HSRP)=
-===NAT konfigurieren===
+*[[Hot Standby Router Protocol (HSRP)]]
- Router(config)# ip nat pool pool1 192.168.1.0 192.168.2.0 netmask 0.0.0.255
+=Policy-Based Routing=
+*[[Cisco Policy-Based Routing]]
- Router(config)# ip nat inside source list 1 interface dialer 0 overload
+=Misc=
-oder
+*[[Cisco Router Misc]]
- Router(config)# ip nat inside source list acl1 pool pool1
- Router(config)# interface vlan 1
+=Debug=
- Router(config-if)# ip nat inside
+*[[Cisco Debug]]
- Router(config-if)# no shutdown
+=OSPF=
- Router(config-if)# exit
+*[[Cisco OSPF]]
- Router(config)#interface fastethernet 0
- Router(config-if)# ip nat outside
- Router(config-if)# no shutdown
- Router(config-if)# exit
- Router(config)# access-list 1 permit 192.168.1.0 0.0.0.255
-==Links==
+=Links=
 [http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080094498.shtml IPsec von Cisco Router zu Cisco PIX VPN]

Cisco howto: Unterschied zwischen den Versionen