WLAN AccessPoint: Unterschied zwischen den Versionen

Aus Xinux Wiki
Zur Navigation springen Zur Suche springen
← Zum vorherigen VersionsunterschiedZum nächsten Versionsunterschied →
Pascal (Diskussion | Beiträge)
253 Bearbeitungen
Thomas (Diskussion | Beiträge)
9.024 Bearbeitungen
Keine Bearbeitungszusammenfassung
Zeile 1: Zeile 1:
= Vorbereitungen =
=Interfaces=
== USB Passtrough auf VMWare ESXi ==
<pre>
;Eigenschaften -> Hardware:
auto br0
:Hinzufügen
iface br0 inet static
::"USB-Controller"
address 10.81.3.5
::OK
netmask 255.255.255.0
:Hinzufügen
gateway 10.81.0.1
::"USB-Gerät"
dns-nameservers 10.80.0.2 10.80.0.3
::"USB-Hostgerät" auswählen
dns-search xinux.lan tuxmen.de
::OK
pre-up /etc/init.d/hostapd stop
bridge_ports eth0
bridge_stp off
bridge_fd 0
bridge_maxwait 0
up /etc/init.d/hostapd start
</pre>
=hostapd=
<pre>
interface=wlan0
bridge=br0
driver=nl80211
ssid=CHEWINGGUM
hw_mode=g
channel=6
macaddr_acl=0
auth_algs=1
ignore_broadcast_ssid=0
wpa=2
wpa_passphrase=9twin-towers11
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP
</pre>


== WLAN Treiber ==
=== rt73usb Firmware compilieren ===
cd /usr/src/
<nowiki>wget http://www.ralinktech.com.tw/download.php?t=U0wyRnpjMlYwY3k4eU1ERXhMekF5THpJMEwyUnZkMjVzYjJGa01qa3dORGsyTnpZMU9TNWllakk5UFQweU1ERXhYekF5TVRCZlVsUTNNMTlNYVc1MWVGOVRWRUZmUkhKMk1TNHhMakF1TlE9PUM= -O 2011_0210_RT73_Linux_STA_Drv1.1.0.5.bz2</nowiki>
tar -xvjf 2011_0210_RT73_Linux_STA_Drv1.1.0.5.bz2
cd 2011_0210_RT73_Linux_STA_Drv1.1.0.5/Module
make
cp -v rt73.bin /lib/firmware/


== Bridge ==
aptitude install bridge-utils
/etc/network/interfaces
auto br0
iface br0 inet static
# pre-up brctl addbr br0
        pre-up /etc/init.d/hostapd stop
        address 172.28.6.2
        netmask 255.255.255.0
        gateway 172.28.6.1
        bridge_ports eth1 wlan0
        bridge_stp off
        bridge_fd 0
        bridge_maxwait 0
        up /etc/init.d/hostapd start
= AccessPoint Konfigurieren =
== hostapd ==
aptitude install hostapd
/etc/default/hostapd
DAEMON_CONF="/etc/hostapd/hostapd.conf"
/etc/hostapd/hostapd.conf
interface=wlan0                                    # WLAN Device
bridge=br0                                        # Bridge Device, falls WLAN via Bridge genutzt wird
driver=nl80211                                    # Treiber
hw_mode=g                                          # Aktivierung von 802.11g
ssid=<SSID-NAME>                                  # Netwerk Name
channel=2                                          # Kanal
wpa=2                                              # WPA Version
wpa_passphrase=<SECURE PASSWORD>                  # Passwort
wpa_key_mgmt=WPA-PSK
wpa_pairwise=CCMP
wpa_group_rekey=600
wpa_gmk_rekey=86400
== DHCP ==
== wpa_supplicant ==


= Links =
= Links =
* https://wiki.ubuntuusers.de/Netzwerkbr%C3%BCcke/#Bruecken-in-drahtlose-Netze
* http://ubuntuforums.org/showthread.php?t=400236&page=118
* http://ubuntuforums.org/showthread.php?t=400236&page=118
* http://www.linux.com/learn/tutorials/442417-create-a-secure-linux-based-wireless-access-point
* http://www.linux.com/learn/tutorials/442417-create-a-secure-linux-based-wireless-access-point

Version vom 10. Juli 2017, 10:24 Uhr

Interfaces

auto br0
iface br0 inet static
 address 10.81.3.5
 netmask 255.255.255.0
 gateway 10.81.0.1
 dns-nameservers 10.80.0.2 10.80.0.3
 dns-search xinux.lan tuxmen.de
 pre-up /etc/init.d/hostapd stop
 bridge_ports eth0
 bridge_stp off
 bridge_fd 0
 bridge_maxwait 0
 up /etc/init.d/hostapd start

hostapd

interface=wlan0
bridge=br0
driver=nl80211
ssid=CHEWINGGUM
hw_mode=g
channel=6
macaddr_acl=0
auth_algs=1
ignore_broadcast_ssid=0
wpa=2
wpa_passphrase=9twin-towers11
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP


Links

Abgerufen von „https://wiki.ixheim.de/index.php?title=WLAN_AccessPoint&oldid=13687“