Linux Link Aggregation: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
Die Seite wurde neu angelegt: „=Installation= sudo apt-get install ifenslave-2.6 =Weitere nützliche Tools= sudo apt-get install net-tools ethtool bmon =Integrität und Fultkionscheck root…“ |
|||
| Zeile 7: | Zeile 7: | ||
eth4: negotiated 1000baseT-FD flow-control, link ok | eth4: negotiated 1000baseT-FD flow-control, link ok | ||
eth5: negotiated 1000baseT-FD flow-control, link ok | eth5: negotiated 1000baseT-FD flow-control, link ok | ||
=/etc/network/interfaces= | |||
auto bond0 | |||
iface bond0 inet static | |||
address 172.27.131.100 | |||
netmask 255.255.255.0 | |||
slaves eth4 eth5 | |||
bond_mode 0 | |||
bond_miimon 100 | |||
bond_updelay 200 | |||
bond_downdelay 200 | |||
Version vom 5. März 2013, 09:21 Uhr
Installation
sudo apt-get install ifenslave-2.6
Weitere nützliche Tools
sudo apt-get install net-tools ethtool bmon
=Integrität und Fultkionscheck
root@crank:~# mii-tool eth4: negotiated 1000baseT-FD flow-control, link ok eth5: negotiated 1000baseT-FD flow-control, link ok
/etc/network/interfaces
auto bond0 iface bond0 inet static address 172.27.131.100 netmask 255.255.255.0 slaves eth4 eth5 bond_mode 0 bond_miimon 100 bond_updelay 200 bond_downdelay 200