Gre tunnel linux: Unterschied zwischen den Versionen

Aus Xinux Wiki
Zur Navigation springen Zur Suche springen
Zeile 16: Zeile 16:
 
  address 192.168.33.1
 
  address 192.168.33.1
 
  netmask 255.255.255.0
 
  netmask 255.255.255.0
 +
 
#TUN
 
#TUN
 
 
auto  gretun
 
auto  gretun
 
iface gretun inet static
 
iface gretun inet static

Version vom 8. September 2022, 17:11 Uhr

Layout

-192.168.33.1/24 -|garlic|-10.82.1.211---------------------10.82.1.195-|hubsi|-192.168.55.1/24

Interfaces

garlic

#WAN
auto eth0
iface eth0 inet static
 address 10.82.1.211
 netmask 255.255.0.0
 gateway 10.82.0.1

#LAN
auto eth1
iface eth1 inet static
 address 192.168.33.1
 netmask 255.255.255.0

#TUN
auto  gretun
iface gretun inet static
  address 172.30.30.1
  pointopoint 172.30.30.2
  pre-up ip tunnel add gretun mode gre remote 10.82.1.195 local 10.82.1.211 ttl 255
  post-up ip route add 192.168.55.0/24 via 172.30.30.2

hubsi

#WAN
auto eth0
iface eth0 inet static
 address 10.82.1.195
 netmask 255.255.0.0
 gateway 10.82.0.1

#LAN
auto eth1
iface eth1 inet static
 address 192.168.55.1
 netmask 255.255.255.0
#TUN
auto  gretun
iface gretun inet static
  address 172.30.30.2
  pointopoint 172.30.30.1
  pre-up ip tunnel add gretun mode gre remote 10.82.1.211 local 10.82.1.195 ttl 255
  post-up ip route add 192.168.33.0/24 via 172.30.30.1

Ipforward on

  • cat /etc/sysctl.conf
net.ipv4.ip_forward=1
  • sysctl -p

Static

garlic

auto  gretun
iface gretun inet static
  address 172.30.30.1
  pointopoint 172.30.30.2
  pre-up ip tunnel add gretun mode gre remote 10.82.1.195 local 10.82.1.211 ttl 255
  post-up ip route add 192.168.55.0/24 via 172.30.30.2

hubsi