Gre tunnel linux: Unterschied zwischen den Versionen

Aus Xinux Wiki
Zur Navigation springen Zur Suche springen
Zeile 54: Zeile 54:
 
  net.ipv4.ip_forward=1
 
  net.ipv4.ip_forward=1
 
*sysctl -p
 
*sysctl -p
 
=Static=
 
==garlic==
 
<pre>
 
auto  gretun
 
iface gretun inet static
 
  address 172.30.30.1
 
  pointopoint 172.30.30.2
 
  pre-up ip tunnel add gretun mode gre remote 10.82.1.195 local 10.82.1.211 ttl 255
 
  post-up ip route add 192.168.55.0/24 via 172.30.30.2
 
</pre>
 
==hubsi==
 

Version vom 8. September 2022, 17:12 Uhr

Layout

-192.168.33.1/24 -|garlic|-10.82.1.211---------------------10.82.1.195-|hubsi|-192.168.55.1/24

Interfaces

garlic

#WAN
auto eth0
iface eth0 inet static
 address 10.82.1.211
 netmask 255.255.0.0
 gateway 10.82.0.1

#LAN
auto eth1
iface eth1 inet static
 address 192.168.33.1
 netmask 255.255.255.0

#TUN
auto  gretun
iface gretun inet static
  address 172.30.30.1
  pointopoint 172.30.30.2
  pre-up ip tunnel add gretun mode gre remote 10.82.1.195 local 10.82.1.211 ttl 255
  post-up ip route add 192.168.55.0/24 via 172.30.30.2

hubsi

#WAN
auto eth0
iface eth0 inet static
 address 10.82.1.195
 netmask 255.255.0.0
 gateway 10.82.0.1

#LAN
auto eth1
iface eth1 inet static
 address 192.168.55.1
 netmask 255.255.255.0

#TUN
auto  gretun
iface gretun inet static
  address 172.30.30.2
  pointopoint 172.30.30.1
  pre-up ip tunnel add gretun mode gre remote 10.82.1.211 local 10.82.1.195 ttl 255
  post-up ip route add 192.168.33.0/24 via 172.30.30.1

Ipforward on

  • cat /etc/sysctl.conf
net.ipv4.ip_forward=1
  • sysctl -p