Gre tunnel linux

Layout

[Bearbeiten]

Ipforward on

Wenn geroutet wird muss man immer ip_forward einschalten

• cat /etc/sysctl.conf

net.ipv4.ip_forward=1

• sysctl -p

Interfaces

Standard GRE Tunnel unverschlüsselt

garlic

#WAN
auto eth0
iface eth0 inet static
 address 10.82.1.211
 netmask 255.255.0.0
 gateway 10.82.0.1

#LAN
auto eth1
iface eth1 inet static
 address 192.168.33.1
 netmask 255.255.255.0

#TUN
auto  gretun
iface gretun inet static
  address 172.30.30.1
  pointopoint 172.30.30.2
  pre-up ip tunnel add gretun mode gre remote 10.82.1.195 local 10.82.1.211 ttl 255
  post-up ip route add 192.168.55.0/24 via 172.30.30.2

hubsi

#WAN
auto eth0
iface eth0 inet static
 address 10.82.1.195
 netmask 255.255.0.0
 gateway 10.82.0.1

#LAN
auto eth1
iface eth1 inet static
 address 192.168.55.1
 netmask 255.255.255.0

#TUN
auto  gretun
iface gretun inet static
  address 172.30.30.2
  pointopoint 172.30.30.1
  pre-up ip tunnel add gretun mode gre remote 10.82.1.211 local 10.82.1.195 ttl 255
  post-up ip route add 192.168.33.0/24 via 172.30.30.1