Procurve Radius Server Anbindung: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
Thomas (Diskussion | Beiträge) |
Thomas (Diskussion | Beiträge) |
||
| Zeile 4: | Zeile 4: | ||
xinux Cleartext-Password := "suxer" | xinux Cleartext-Password := "suxer" | ||
rudi Cleartext-Password := "wiggel" | rudi Cleartext-Password := "wiggel" | ||
| − | + | *tail -8 /etc/freeradius/clients.conf | |
| − | + | client lan-clients { | |
| − | + | ipaddr = 192.168.240.0 | |
| − | + | netmask = 21 | |
| + | secret = sysadm | ||
| + | require_message_authenticator = no | ||
| + | nastype = other | ||
| + | } | ||
=Radius Server Einrichten= | =Radius Server Einrichten= | ||
Version vom 13. April 2016, 17:12 Uhr
Freeradius
- head -3 /etc/freeradius/users
60eb69962da5 Cleartext-Password := "60eb69962da5" xinux Cleartext-Password := "suxer" rudi Cleartext-Password := "wiggel"
- tail -8 /etc/freeradius/clients.conf
client lan-clients {
ipaddr = 192.168.240.0
netmask = 21
secret = sysadm
require_message_authenticator = no
nastype = other
}
Radius Server Einrichten
- configure terminal
- radius-server host 192.168.244.49 auth-port 1812 acct-port 1813
- radius-server key sysadm
- end
Generelle Parameter
- configure terminal
- aaa authentication port-access eap-radius
- end
Set general port-access Parameters
- configure terminal
- aaa authentication ssh login radius local
- aaa authentication ssh enable radius local
- aaa authentication console login radius local
- aaa authentication console enable radius local
- aaa authentication login privilege-mode
- end
Macbased Access
- configure terminal
- aaa port-access mac-based 22