Procurve Radius Server Anbindung: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
Thomas (Diskussion | Beiträge) |
Thomas (Diskussion | Beiträge) |
||
| Zeile 18: | Zeile 18: | ||
*radius-server key sysadm | *radius-server key sysadm | ||
*end | *end | ||
| + | =Radius Server Status anzeigen= | ||
| + | *show radius | ||
| + | <pre> | ||
| + | Status and Counters - General RADIUS Information | ||
| + | |||
| + | Deadtime(min) : 0 | ||
| + | Timeout(secs) : 5 | ||
| + | Retransmit Attempts : 3 | ||
| + | Global Encryption Key : sysadm | ||
| + | |||
| + | Auth Acct | ||
| + | Server IP Addr Port Port Encryption Key | ||
| + | --------------- ----- ----- -------------------------------- | ||
| + | 192.168.244.49 1812 1813 | ||
| + | </pre> | ||
| + | |||
=Set general port-access Parameters= | =Set general port-access Parameters= | ||
*configure terminal | *configure terminal | ||
Version vom 14. April 2016, 12:38 Uhr
Freeradius
- head -3 /etc/freeradius/users
60eb69962da5 Cleartext-Password := "60eb69962da5" xinux Cleartext-Password := "suxer" rudi Cleartext-Password := "wiggel"
- tail -8 /etc/freeradius/clients.conf
client lan-clients {
ipaddr = 192.168.240.0
netmask = 21
secret = sysadm
require_message_authenticator = no
nastype = other
}
Radius Server Einrichten
- configure terminal
- radius-server host 192.168.244.49 auth-port 1812 acct-port 1813
- radius-server key sysadm
- end
Radius Server Status anzeigen
- show radius
Status and Counters - General RADIUS Information
Deadtime(min) : 0
Timeout(secs) : 5
Retransmit Attempts : 3
Global Encryption Key : sysadm
Auth Acct
Server IP Addr Port Port Encryption Key
--------------- ----- ----- --------------------------------
192.168.244.49 1812 1813
Set general port-access Parameters
- configure terminal
- aaa authentication ssh login radius local
- aaa authentication ssh enable radius local
- aaa authentication console login radius local
- aaa authentication console enable radius local
- aaa authentication login privilege-mode
- end
Generelle Parameter
- configure terminal
- aaa authentication port-access eap-radius
- end
Macbased Access
- configure terminal
- aaa port-access mac-based 22
Config anzeigen
- show port-access ethernet 22 mac-based config
Port Access MAC-Based Configuration
MAC Address Format : no-delimiter
Client Client Logoff Re-Auth Unauth Auth
Port Enabled Limit Moves Period Period VLAN ID VLAN ID
----- -------- ------ ------ --------- --------- -------- --------
22 Yes 2 No 300 0 0 0
Clients anzeigen
Nicht erfolgreich
- show port-access ethernet 22 mac-based
Port Access MAC-Based Status
Authenticated Unauthenticated Current
Port Clients Clients VLAN ID
----- ------------- --------------- --------
22 0 1 10
- show port-access ethernet 22 mac-based clients
Port Access MAC-Based Client Status Port MAC Address Session Status Time ----- ------------- --------------------- -------- 22 00040e-0b182d rejected-no vlan 3 secs
Erfolgreich
- show port-access ethernet 22 mac-based
Port Access MAC-Based Status
Authenticated Unauthenticated Current
Port Clients Clients VLAN ID
----- ------------- --------------- --------
22 1 0 10
- show port-access ethernet 22 mac-based clients
Port Access MAC-Based Client Status Port MAC Address Session Status Time ----- ------------- --------------------- -------- 22 60eb69-962da5 authenticated 2 mins