BananaPi

Links

• http://www.banana-pi.org/download.html
• https://blog.rotzoll.net/2013/04/raspberry-pi-wlan-access-point-einrichten-mit-realtek-8188cus-usb-wlan-adapter/
• https://bogeskov.dk/UsbAccessPoint.html
• http://forum.lemaker.org/thread-13017-1-1.html

Switch

• cat /etc/network/if-pre-up.d/swconfig

#!/bin/sh
#exit 0
ifconfig eth0 up
# The swconfig port number are:
# |2|1|0|4|  |3|
swconfig dev eth0 set reset 1
swconfig dev eth0 set enable_vlan 1
swconfig dev eth0 vlan 101 set ports '3 8t'
swconfig dev eth0 vlan 102 set ports '4 0 8t'
swconfig dev eth0 vlan 103 set ports '1 2 8t'
swconfig dev eth0 set apply 1

• cat /etc/network/interfaces

source-directory /etc/network/interfaces.d
auto lo
iface lo inet loopback

auto eth0.101
iface eth0.101 inet static
        address 192.168.241.148
        netmask 255.255.248.0
        gateway 192.168.240.100

auto eth0.102
iface eth0.102 inet static
        address 172.28.6.1
        netmask 255.255.255.0

auto eth0.103
iface eth0.103 inet static
        address 10.28.6.1
        netmask 255.255.255.0