Xl2tpd-strongswan: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
| Zeile 23: | Zeile 23: | ||
[global] | [global] | ||
ipsec saref = yes | |||
debug avp = yes | |||
debug network = yes | |||
debug state = yes | |||
debug tunnel = yes | |||
[lns default] | |||
ip range = 10.1.2.2-10.1.2.255 | |||
local ip = 10.1.2.1 | |||
refuse chap = yes | |||
refuse pap = yes | |||
require authentication = yes | |||
ppp debug = yes | |||
pppoptfile = /etc/ppp/options.xl2tpd | |||
length bit = yes | |||
==PPP== | ==PPP== | ||
Version vom 5. Juli 2017, 14:11 Uhr
Installation
apt-get install xl2tpd ppp strongswan
strongswan
ipsec.conf complete
conn l2tp
keyexchange=ikev1
left=10.84.252.32
auto=add
authby=secret
type=transport
leftprotoport=17/1701
rightprotoport=17/%any
right=%any
cat /etc/ipsec.secrets 10.84.252.32 %any : PSK "1234"
XL2TP
cat /etc/xl2tpd/xl2tpd.conf
[global]
ipsec saref = yes debug avp = yes debug network = yes debug state = yes debug tunnel = yes
[lns default] ip range = 10.1.2.2-10.1.2.255 local ip = 10.1.2.1 refuse chap = yes refuse pap = yes require authentication = yes ppp debug = yes pppoptfile = /etc/ppp/options.xl2tpd length bit = yes
PPP
cat /etc/ppp/options.xl2tpd require-mschap-v2 ms-dns 192.168.240.21 ms-dns 192.168.240.22 asyncmap 0 auth crtscts lock hide-password modem #for ppp3 unit 3 debug name l2tpd proxyarp lcp-echo-interval 30 lcp-echo-failure 4
cat /etc/ppp/chap-secrets xinux l2tpd "geheimes-passwort" * #l2tpd xinux "geheimes-passwort" *