Cgroups-cpu: Unterschied zwischen den Versionen

Aus Xinux Wiki
Zur Navigation springen Zur Suche springen
Zeile 3: Zeile 3:
 
*cgcreate -g cpu:/lesscpulimited
 
*cgcreate -g cpu:/lesscpulimited
  
=Welche Parameter sind Subsystem Block-I/O vorhanden=
+
=Welche Parameter sind vorhanden=
*cgget -g blkio  /mygroup
+
*cgget -g cpu /cpulimited
 
<pre>
 
<pre>
/mygroup:
+
/cpulimited:
blkio.throttle.io_serviced: Total 0
+
cpu.shares: 1024
blkio.io_service_bytes_recursive: Total 0
+
cpu.cfs_quota_us: -1
blkio.io_serviced_recursive: Total 0
+
cpu.stat: nr_periods 0
blkio.time:
+
nr_throttled 0
blkio.io_serviced: Total 0
+
throttled_time 0
blkio.reset_stats:
+
cpu.cfs_period_us: 100000
blkio.io_wait_time: Total 0
 
blkio.weight: 500
 
blkio.leaf_weight_device:
 
blkio.throttle.read_iops_device:
 
blkio.io_merged_recursive: Total 0
 
blkio.throttle.write_bps_device:
 
blkio.leaf_weight: 500
 
blkio.sectors_recursive:
 
blkio.weight_device:
 
blkio.io_service_time_recursive: Total 0
 
blkio.throttle.write_iops_device:
 
blkio.throttle.io_service_bytes: Total 0
 
blkio.io_service_bytes: Total 0
 
blkio.io_wait_time_recursive: Total 0
 
blkio.io_service_time: Total 0
 
blkio.time_recursive:
 
blkio.io_merged: Total 0
 
blkio.throttle.read_bps_device:
 
blkio.sectors:
 
blkio.io_queued: Total 0
 
blkio.io_queued_recursive: Total 0
 
 
</pre>
 
</pre>
  

Version vom 14. Oktober 2017, 15:17 Uhr

Anlegen von Control Groups

  • cgcreate -g cpu:/cpulimited
  • cgcreate -g cpu:/lesscpulimited

Welche Parameter sind vorhanden

  • cgget -g cpu /cpulimited
/cpulimited:
cpu.shares: 1024
cpu.cfs_quota_us: -1
cpu.stat: nr_periods 0
	nr_throttled 0
	throttled_time 0
cpu.cfs_period_us: 100000

Geschwindigkeit einschränken

  • echo "8:16 1048576" > /sys/fs/cgroup/blkio/mygroup/blkio.throttle.write_bps_device

Ohne Einschränkung

  • dd if=/dev/zero of=/tmp/test count=50 bs=100M
50+0 records in
50+0 records out
5242880000 bytes (5.2 GB, 4.9 GiB) copied, 23.0043 s, 228 MB/s

Mit Einschränkung(Funktioniert nicht wie gewünscht)

  • cgexec -g blkio:/mygroup dd if=/dev/zero of=/tmp/test count=50 bs=100M