Stunnel from the Source: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
Die Seite wurde neu angelegt: „*apt install libssl-dev *wget https://www.stunnel.org/downloads/stunnel-5.55.tar.gz *tar -xvzf stunnel-5.55.tar.gz *cd stunnel-5.55/ *./configure *make *make…“ |
Keine Bearbeitungszusammenfassung |
||
| Zeile 1: | Zeile 1: | ||
=download, compile and install= | |||
*apt install libssl-dev | *apt install libssl-dev | ||
*wget https://www.stunnel.org/downloads/stunnel-5.55.tar.gz | *wget https://www.stunnel.org/downloads/stunnel-5.55.tar.gz | ||
| Zeile 6: | Zeile 7: | ||
*make | *make | ||
*make install | *make install | ||
=configure= | |||
*mkdir /etc/stunnel | |||
*cat stunnel.conf | |||
<pre> | |||
debug = 7 | |||
output = /var/log/stunnel.log | |||
pid = /var/run/stunnel4/stunnel.pid | |||
[https] | |||
accept = 443 | |||
connect = 10.80.100.10:80 | |||
cert = /etc/stunnel/example.pem | |||
</pre> | |||
Version vom 2. September 2019, 11:05 Uhr
download, compile and install
- apt install libssl-dev
- wget https://www.stunnel.org/downloads/stunnel-5.55.tar.gz
- tar -xvzf stunnel-5.55.tar.gz
- cd stunnel-5.55/
- ./configure
- make
- make install
configure
- mkdir /etc/stunnel
- cat stunnel.conf
debug = 7 output = /var/log/stunnel.log pid = /var/run/stunnel4/stunnel.pid [https] accept = 443 connect = 10.80.100.10:80 cert = /etc/stunnel/example.pem