GNS3 Remote Server: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
| Zeile 13: | Zeile 13: | ||
=Service Systemd= | =Service Systemd= | ||
*sudo cp init/gns3.service.systemd /etc/systemd/system/gns3.service | *sudo cp init/gns3.service.systemd /etc/systemd/system/gns3.service | ||
| − | *sudo chown root / | + | *sudo chown root /etc/systemd/system/gns3.service |
| + | |||
=Rechte= | =Rechte= | ||
*gpasswd -a gns3 ubridge | *gpasswd -a gns3 ubridge | ||
*gpasswd -a gns3 wireshark | *gpasswd -a gns3 wireshark | ||
Version vom 10. November 2021, 13:40 Uhr
User anlegen
- sudo adduser gns3
Pakete installieren
- apt install python3-setuptools python3-aiohttp python3-psutil python3-jsonschema git
KVM Installation Basis
Git clone
- git clone https://github.com/GNS3/gns3-server.git
Change Directory
- cd gns3-server
Install
- sudo python3 setup.py install
Service Systemd
- sudo cp init/gns3.service.systemd /etc/systemd/system/gns3.service
- sudo chown root /etc/systemd/system/gns3.service
Rechte
- gpasswd -a gns3 ubridge
- gpasswd -a gns3 wireshark