L2TP: Unterschied zwischen den Versionen

Aus Xinux Wiki
Zur Navigation springen Zur Suche springen
Keine Bearbeitungszusammenfassung
Zeile 1: Zeile 1:
=Installation=
=Server=
 
==Installation==
  apt-get install  xl2tpd ppp openswan
  apt-get install  xl2tpd ppp openswan
=Openswan=
==Openswan==
  cat /etc/ipsec.conf
  cat /etc/ipsec.conf
  version 2.0
  version 2.0
Zeile 21: Zeile 23:
  cat /etc/ipsec.secrets  
  cat /etc/ipsec.secrets  
  XXX.XXX.XXX.XXX  %any : PSK "1234"
  XXX.XXX.XXX.XXX  %any : PSK "1234"
=XL2TP=
==XL2TP==
  cat /etc/xl2tpd/xl2tpd.conf  
  cat /etc/xl2tpd/xl2tpd.conf  


Zeile 37: Zeile 39:
  length bit = yes
  length bit = yes


=PPP=
==PPP==
  cat /etc/ppp/options.xl2tpd
  cat /etc/ppp/options.xl2tpd
   
   
Zeile 60: Zeile 62:
  l2tpd        xinux   "geheimes-passwort"       *
  l2tpd        xinux   "geheimes-passwort"       *


~                                                                                                               
=Client=
~                                                                                                               
==Installation==
~                             
apt-get install  xl2tpd ppp openswan
 





Version vom 31. Oktober 2012, 22:47 Uhr

Server

Installation

apt-get install  xl2tpd ppp openswan

Openswan

cat /etc/ipsec.conf
version 2.0
config setup
    nat_traversal=yes
    virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12
    oe=off
    protostack=netkey
conn l2tp
   authby=secret
   pfs=no
   auto=add
   type=transport
   left=XXX.XXX.XXX.XXX
   leftprotoport=17/1701
   right=%any
   rightprotoport=17/%any
cat /etc/ipsec.secrets 
XXX.XXX.XXX.XXX  %any : PSK "1234"

XL2TP

cat /etc/xl2tpd/xl2tpd.conf 
[global]
ipsec saref = yes

[lns default]
ip range = 10.1.2.2-10.1.2.255
local ip = 10.1.2.1
refuse chap = yes
refuse pap = yes
require authentication = yes
ppp debug = yes
pppoptfile = /etc/ppp/options.xl2tpd
length bit = yes

PPP

cat /etc/ppp/options.xl2tpd

require-mschap-v2
ms-dns 192.168.240.21
ms-dns 192.168.240.22
asyncmap 0
auth
crtscts
lock
hide-password
modem
debug
name l2tpd
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
cat /etc/ppp/chap-secrets 

xinux        l2tpd       "geheimes-passwort"	       *
l2tpd        xinux	  "geheimes-passwort"	       *

Client

Installation

apt-get install  xl2tpd ppp openswan


Quellen: