OPNsense Route based (VTI) PSK setup: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
| Zeile 40: | Zeile 40: | ||
==opnsense.it114.int VTI== | ==opnsense.it114.int VTI== | ||
| − | + | {| class="wikitable" | |
| + | ! Einstellung || Wert | ||
| + | |- | ||
| + | | '''Enabled''' || aktiviert (✓) | ||
| + | |- | ||
| + | | '''Reqid''' || 10 | ||
| + | |- | ||
| + | | '''Local address''' || 192.168.6.114 | ||
| + | |- | ||
| + | | '''Remote address''' || 192.168.6.113 | ||
| + | |- | ||
| + | | '''Tunnel local address''' || 169.254.100.1 | ||
| + | |- | ||
| + | | '''Tunnel remote address''' || 169.254.100.2 | ||
| + | |- | ||
| + | | '''Tunnel secondary local address''' || – | ||
| + | |- | ||
| + | | '''Tunnel secondary remote address''' || – | ||
| + | |- | ||
| + | | '''Name''' || IPSEC10 | ||
| + | |} | ||
| + | |||
=VPN: IPsec: Connections= | =VPN: IPsec: Connections= | ||
==opnsense.it113.int Connections== | ==opnsense.it113.int Connections== | ||
Version vom 2. April 2025, 18:13 Uhr
Szenario
| Einstellung | opnsense.it113.int | opnsense2.it113.int |
|---|---|---|
| IP Address | 192.168.6.113 | 192.168.6.114 |
| Tunnel IP | 169.254.100.1 | 169.254.100.2 |
| Internes Netz | 172.88.113.0/24 | 172.88.114.0/24 |
| Pre-Shared Key (PSK) | 123Start$ | |
| Phase 1 | AES256 – SHA256 – DH16 | |
| Phase 2 | AES256 – SHA256 – DH16 | |
VPN: IPsec: Virtual Tunnel Interfaces
opnsense.it113.int VTI
| Einstellung | Wert |
|---|---|
| Enabled | aktiviert (✓) |
| Reqid | 10 |
| Local address | 192.168.6.113 |
| Remote address | 192.168.6.114 |
| Tunnel local address | 169.254.100.2 |
| Tunnel remote address | 169.254.100.1 |
| Tunnel secondary local address | – |
| Tunnel secondary remote address | – |
| Name | IPSEC10 |
opnsense.it114.int VTI
| Einstellung | Wert |
|---|---|
| Enabled | aktiviert (✓) |
| Reqid | 10 |
| Local address | 192.168.6.114 |
| Remote address | 192.168.6.113 |
| Tunnel local address | 169.254.100.1 |
| Tunnel remote address | 169.254.100.2 |
| Tunnel secondary local address | – |
| Tunnel secondary remote address | – |
| Name | IPSEC10 |