Firwall 5105

Erklärung

• XX = Platznummer
• Y = Klassensaal

Hostname

Grundkonfiguration

• debian-setup -f fw.it213.int -a 192.168.HS.TN/24 -g 192.168.HS.254. -n 1.1.1.1
• reboot

Weitere Interfaces

• cat/etc/network/interfaces

auto lo
iface lo inet loopback

auto enp0s3
iface enp0s3 inet static
 address 192.168.HS.TN/24
 gateway 192.168.HS.254

auto enp0s8
iface enp0s8 inet static
 address 172.26.TN.1/24

auto enp0s9
iface enp0s9 inet static
 address 10.88.TN.1

Hosts

• cat /etc/hosts

127.0.0.1       localhost
127.0.1.1       fw.it1XX.int fw

# The following lines are desirable for IPv6 capable hosts
::1     localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters

Resolver

• cat /etc/resolv.conf

search it1XX.int
nameserver 192.168.Y.88

Nat

• cat /usr/local/sbin/nat.sh

#!/bin/bash
LAN="172.16.1XX.0/24"
SERVERS="10.1XX.1.0/24"
DMZ="10.88.1XX.0/24"
#Nat Regeln flushen
iptables -t nat -F 
#Nat Regelen setzen
iptables -t nat -A POSTROUTING -s $DMZ -d 192.168.Y.0/24 -j RETURN
iptables -t nat -A POSTROUTING -s $DMZ -d 10.88.0.0/16 -j RETURN
iptables -t nat -A POSTROUTING -s $DMZ -o enp0s3 -j MASQUERADE
iptables -t nat -A POSTROUTING -s $LAN -o enp0s3 -j MASQUERADE
iptables -t nat -A POSTROUTING -s $SERVERS -o enp0s3 -j MASQUERADE

• chmod +x /usr/local/sbin/nat.sh

NAT mit nftables

#!/usr/sbin/nft -f

# Variablen
define LAN = 172.16.1XX.0/24
define SERVERS = 10.1XX.1.0/24
define DMZ = 10.88.1XX.0/24

# Alte Regeln löschen (flush)
flush table ip nat

# NAT-Tabelle erstellen/verwenden
table ip nat {
    chain postrouting {
        type nat hook postrouting priority 100; policy accept;
        
        # DMZ nach 192.168.Y.0/24 - kein NAT (RETURN)
        ip saddr $DMZ ip daddr 192.168.Y.0/24 return
        
        # DMZ nach 10.88.0.0/16 - kein NAT (RETURN)
        ip saddr $DMZ ip daddr 10.88.0.0/16 return
        
        # DMZ nach außen (enp0s3) - Masquerade
        ip saddr $DMZ oif enp0s3 masquerade
        
        # LAN nach außen - Masquerade
        ip saddr $LAN oif enp0s3 masquerade
        
        # SERVERS nach außen - Masquerade
        ip saddr $SERVERS oif enp0s3 masquerade
    }
}

Forward

• echo "net.ipv4.ip_forward=1" >> /etc/sysctl.conf
• sysctl -p

Reboot

• systemctl reboot