Procurve Radius Server Anbindung: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
David (Diskussion | Beiträge) (→Links) |
Thomas (Diskussion | Beiträge) |
||
| Zeile 17: | Zeile 17: | ||
*radius-server host 192.168.244.49 auth-port 1812 acct-port 1813 | *radius-server host 192.168.244.49 auth-port 1812 acct-port 1813 | ||
*radius-server key sysadm | *radius-server key sysadm | ||
| − | |||
| − | |||
| − | |||
| − | |||
*end | *end | ||
=Set general port-access Parameters= | =Set general port-access Parameters= | ||
| Zeile 29: | Zeile 25: | ||
*aaa authentication console enable radius local | *aaa authentication console enable radius local | ||
*aaa authentication login privilege-mode | *aaa authentication login privilege-mode | ||
| + | *end | ||
| + | =Generelle Parameter= | ||
| + | *configure terminal | ||
| + | *aaa authentication port-access eap-radius | ||
*end | *end | ||
=Macbased Access= | =Macbased Access= | ||
Version vom 14. April 2016, 09:26 Uhr
Freeradius
- head -3 /etc/freeradius/users
60eb69962da5 Cleartext-Password := "60eb69962da5" xinux Cleartext-Password := "suxer" rudi Cleartext-Password := "wiggel"
- tail -8 /etc/freeradius/clients.conf
client lan-clients {
ipaddr = 192.168.240.0
netmask = 21
secret = sysadm
require_message_authenticator = no
nastype = other
}
Radius Server Einrichten
- configure terminal
- radius-server host 192.168.244.49 auth-port 1812 acct-port 1813
- radius-server key sysadm
- end
Set general port-access Parameters
- configure terminal
- aaa authentication ssh login radius local
- aaa authentication ssh enable radius local
- aaa authentication console login radius local
- aaa authentication console enable radius local
- aaa authentication login privilege-mode
- end
Generelle Parameter
- configure terminal
- aaa authentication port-access eap-radius
- end
Macbased Access
- configure terminal
- aaa port-access mac-based 22