Cisco Mac Authentication Bypass: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
Thomas (Diskussion | Beiträge) Keine Bearbeitungszusammenfassung |
Thomas (Diskussion | Beiträge) |
||
| Zeile 10: | Zeile 10: | ||
*config terminal | *config terminal | ||
*interface GigabitEthernet1/0/24 | *interface GigabitEthernet1/0/24 | ||
*switchport access vlan 1 | |||
*switchport mode access | *switchport mode access | ||
*authentication port-control auto | *authentication port-control auto | ||
*mab | |||
*spanning-tree portfast | *spanning-tree portfast | ||
* | *spanning-tree bpduguard enable | ||
=Links= | =Links= | ||
*http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/identity-based-networking-services/config_guide_c17-663759.html | *http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/identity-based-networking-services/config_guide_c17-663759.html | ||
Version vom 25. April 2016, 10:36 Uhr
Radiusanbindung
Allgemeine Konfiguration
- aaa new-model
- aaa authentication dot1x default group radius
- Üaaa authorization network default group radius
- aaa accounting dot1x default start-stop group radius
Interface
- config terminal
- interface GigabitEthernet1/0/24
- switchport access vlan 1
- switchport mode access
- authentication port-control auto
- mab
- spanning-tree portfast
- spanning-tree bpduguard enable