Procurve Radius Server Anbindung

Aus Xinux Wiki
Zur Navigation springen Zur Suche springen

Freeradius

  • head -3 /etc/freeradius/users
60eb69962da5  Cleartext-Password := "60eb69962da5"
xinux  Cleartext-Password := "suxer"
rudi  Cleartext-Password  := "wiggel"
  • tail -8 /etc/freeradius/clients.conf
client lan-clients {
 ipaddr = 192.168.240.0
 netmask = 21
 secret = sysadm
 require_message_authenticator = no
 nastype = other
}

Radius Server Einrichten

  • configure terminal
  • radius-server host 192.168.244.49 auth-port 1812 acct-port 1813
  • radius-server key sysadm
  • end

Set general port-access Parameters

  • configure terminal
  • aaa authentication ssh login radius local
  • aaa authentication ssh enable radius local
  • aaa authentication console login radius local
  • aaa authentication console enable radius local
  • aaa authentication login privilege-mode
  • end

Generelle Parameter

  • configure terminal
  • aaa authentication port-access eap-radius
  • end

Macbased Access

  • configure terminal
  • aaa port-access mac-based 22

Clients anzeigen

Nicht erfolgreich

  • show port-access ethernet 22 mac-based
 Port Access MAC-Based Status

        Authenticated Unauthenticated Current 
  Port  Clients       Clients         VLAN ID 
  ----- ------------- --------------- --------
  22    0             1               10      

Erfolgreich

  • show port-access ethernet 22 mac-based
 Port Access MAC-Based Status

        Authenticated Unauthenticated Current 
  Port  Clients       Clients         VLAN ID 
  ----- ------------- --------------- --------
  22    1             0               10      

Links