Juniper Basic Setting

Aus Xinux Wiki

Version vom 27. November 2017, 11:04 Uhr von Thomas (Diskussion | Beiträge) (→‎Set phase 1)

(Unterschied) ← Nächstältere Version | Aktuelle Version (Unterschied) | Nächstjüngere Version → (Unterschied)

Zur Navigation springen Zur Suche springen

Sysinfo

get sys

Interface setting

set interface untrust ip 10.84.252.41/24
set interface untrust gateway 10.84.252.1
set interface trust ip 10.83.41.1/24
set route 10.81.0.0/16 interface trust gateway 10.83.41.254
set dns host dns1 10.84.252.1

Admin setting

set admin name root
set admin name root
save

Vpn

Define own proposals

set ike p1-proposal p1-aes256-sha1-modp1536 preshare group5 esp aes256 sha-1 hours 3
set ike p2-proposal p2-aes256-sha1-modp1536 group5 esp aes256 sha-1 hours 1

Set networks

set address trust juniper-net 10.83.41.0/24
set address untrust gustavo-net 10.83.41.0/24

Set phase 1

set ike gateway gustavo address 10.84.252.33 main outgoing-interface untrust preshare suxer proposal p1-aes256-sha1-modp1536
set vpn juniper2gustavo gateway gustavo tunnel proposal p2-aes256-sha1-modp1536
set policy top name to-from-gustavo from trust to untrust juniper-net gustavo-net any tunnel vpn juniper2gustavo

policy id = 2

set policy top name to-from-gustavo from untrust to trust gustavo-net juniper-net any tunnel vpn juniper2gustavo

policy id = 3

Abgerufen von „http://wiki.ixheim.de/index.php?title=Juniper_Basic_Setting&oldid=15731“