Juniper Basic Setting

Sysinfo

• get sys

Interface setting

• set interface untrust ip 10.84.252.41/24
• set interface untrust gateway 10.84.252.1
• set interface trust ip 10.83.41.1/24
• set route 10.81.0.0/16 interface trust gateway 10.83.41.254
• set dns host dns1 10.84.252.1

Admin setting

• set admin name root
• set admin name root
• save

Vpn

Define own proposals

• set ike p1-proposal p1-aes256-sha1-modp1536 preshare group5 esp aes256 sha-1 hours 3
• set ike p2-proposal p2-aes256-sha1-modp1536 group5 esp aes256 sha-1 hours 1

Set networks

• set address trust juniper-net 10.83.41.0/24
• set address untrust gustavo-net 10.83.41.0/24

Set phase 1

• set ike gateway gustavo address 10.84.252.33 main outgoing-interface untrust preshare suxer proposal p1-aes256-sha1-modp1536
• set vpn juniper2gustavo gateway gustavo tunnel proposal p2-aes256-sha1-modp1536
• set policy top name to-from-gustavo from trust to untrust juniper-net gustavo-net any tunnel vpn juniper2gustavo

policy id = 2

• set policy top name to-from-gustavo from untrust to trust gustavo-net juniper-net any tunnel vpn juniper2gustavo

policy id = 3

Infos

• get vpn

Name            Gateway         Mode RPlay 1st Proposal         Monitor Use Cnt Interface 
--------------- --------------- ---- ----- -------------------- ------- ------- ----------
juniper2gustavo gustavo         tunl No    p2-aes256-sha1-modp1 off           2 untrust   
  Total Auto VPN: 1