IPv6 Dual Stack Lab

Aus Xinux Wiki
Version vom 11. Januar 2024, 05:46 Uhr von Thomas.will (Diskussion | Beiträge) (Die Seite wurde neu angelegt: „ sysctl -p net.ipv4.ip_forward = 1 net.ipv6.conf.all.forwarding = 1 auto ens4 iface ens4 inet6 static address 2a02:24d8:71:2441::2/64 gateway 2a02:24d8:…“)
(Unterschied) ← Nächstältere Version | Aktuelle Version (Unterschied) | Nächstjüngere Version → (Unterschied)
Zur Navigation springen Zur Suche springen
sysctl -p
net.ipv4.ip_forward = 1
net.ipv6.conf.all.forwarding = 1


auto ens4 iface ens4 inet6 static

address 2a02:24d8:71:2441::2/64
gateway 2a02:24d8:71:2441::1

iface ens4 inet4 static

address 194.59.156.163/27 
gateway 194.59.156.161


iface ens5 inet4 static

address 192.168.44.1/24
post-up ip -4 route add 192.168.45.0/24 via 192.168.44.2 
post-up ip -4 route add 192.168.46.0/24 via 192.168.44.2 
post-up ip -4 route add 192.168.47.0/24 via 192.168.44.2 

auto ens5 iface ens5 inet6 static

address 2a02:24d8:71:2444::1/64
post-up ip -6 route add 2a02:24d8:71:2445::0/64 via 2a02:24d8:71:2444::2
post-up ip -6 route add 2a02:24d8:71:2446::0/64 via 2a02:24d8:71:2444::2
post-up ip -6 route add 2a02:24d8:71:2447::0/64 via 2a02:24d8:71:2444::2


cat /etc/nftables.conf 
  1. !/usr/sbin/nft -f

flush ruleset

table inet filter { chain input { type filter hook input priority filter; } chain forward { type filter hook forward priority filter; } chain output { type filter hook output priority filter; } }

table ip nat { chain postrouting { type nat hook postrouting priority 100; oif ens4 masquerade } }