Cisco DHCP on Vlans

Anzeige Vlan Interfaces mit IP

• switch-gelb#show running-config

interface Vlan1
 ip address 192.168.240.154 255.255.248.0
!         
interface Vlan20
 ip address 192.168.20.1 255.255.255.0
!         
interface Vlan30
 ip address 192.168.30.1 255.255.255.0
!         
interface Vlan40
 ip address 192.168.40.1 255.255.255.0
!  

DHCP Pools anlegen

• switch-gelb#configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

Adressen rausnehmen

• switch-gelb(config)#ip dhcp excluded-address 192.168.20.1 192.168.20.50
• switch-gelb(config)#ip dhcp excluded-address 192.168.30.1 192.168.30.50
• switch-gelb(config)#ip dhcp excluded-address 192.168.40.1 192.168.40.50

DHCP konfiguren

• switch-gelb(config)#ip dhcp pool dpool20
• switch-gelb(dhcp-config)#network 192.168.20.0 255.255.255.0
• switch-gelb(dhcp-config)#default-router 192.168.20.1
• switch-gelb(dhcp-config)#dns-server 192.168.240.200
• switch-gelb(dhcp-config)#work.xinux.org
• switch-gelb(dhcp-config)#ip dhcp pool dpool30
• switch-gelb(dhcp-config)#network 192.168.30.0 255.255.255.0
• switch-gelb(dhcp-config)#default-router 192.168.30.1
• switch-gelb(dhcp-config)#dns-server 192.168.240.200
• switch-gelb(dhcp-config)#office.xinux.org
• switch-gelb(dhcp-config)#ip dhcp pool dpool40
• switch-gelb(dhcp-config)#network 192.168.40.0 255.255.255.0
• switch-gelb(dhcp-config)#default-router 192.168.40.1
• switch-gelb(dhcp-config)#dns-server 192.168.240.200
• switch-gelb(dhcp-config)#domain-name labor.xinux.org